Study of the Electric Resistance of Contact of Frictional Technical Surfaces by Computer-Aided Simulation

Rachishkin, A. A.; Sutyagin, O. V.; Izmailov, V. V.

doi:10.3103/s1068366621030144

Cited by 1 publication

(1 citation statement)

References 5 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…where S m is the average step of asperities (Figure 7). If the values of the criterion K p are >1, then plastic contact is realized between the body and the counterbody, regardless of the load [20][21][22][23][24][25]. In our case, the values of the Williamson-Greenwood criterion (8) for all samples after PENC and the raw reference are >1 (Table 1).…”

Section: Contact Stiffness Calculationmentioning

confidence: 53%

The Effect of Plasma–Electrolytic Nitrocarburizing of a Medium Carbon Steel Surface on Friction and Wear in Pair with Tin–Lead Bronze

Borisov,

Mukhacheva,

Kusmanov

et al. 2023

Metals

View full text Add to dashboard Cite

The possibility of increasing the durability of steel pins working against bronze bushings through plasma–electrolytic nitrocarburizing of the surface of medium carbon steel is shown. The phase composition, microhardness, morphology, and surface roughness were studied. Tribological tests were carried out under dry friction conditions according to the shaft-pad scheme. It has been established that plasma–electrolytic nitrocarburizing of the surface of medium carbon steel at a temperature of 700 °C for 5 min leads to a decrease in the friction coefficient by 2.3 times, the weight wear of steel by 24.9 times, and the wear of the bronze counterbody by 5.9 times. At the same time, the contact stiffness increases by 2.6 times. Type of wear: wear with dry friction and plastic contact. The changes in tribological characteristics are associated with the high hardness of the hardened steel surface combined with the effect of dispersed nitrides and iron carbonitrides.

show abstract