Study of structural changes in metallic materials subjected to shock stress

Abstract

Behavior analysis of materials subjected to extreme demands remains a topical field for a wide range of engineering applications. The materials in discussion are in increasing numbers composites or layered materials, but homogeneous materials are not neglected either. The paper addresses the topic of a homogeneous metallic material subjected to shock loads. Two different thicknesses of alloy steel of known composition were used. Thicknesses used were of 4 mm and 6 mm respectively. After the loads were applied, the samples were cut in the direction of planes passing through the impact point; the microdurity was measured in the crosssection obtained and the medium microdurity areas were plotted. The obtained results allowed the identification of particularities in material behavior, in relation with the thickness, for the same values of the shock energy load and same shape of the penetrator.