Study of platinum and palladium distribution in advanced materials based on tin dioxide using inductively coupled plasma mass spectrometry (ICP-MS)

Abstract

Inductively coupled plasma mass spectrometry (ICP-MS) is used for separate determination of platinum and palladium on the surface and in the bulk of tin dioxide based nanocomposites. Synthesis of SnO2 matrices was conducted using deposition from the solution and flame spray pyrolysis (FSP). The modifiers were injected by impregnation via the dispersion of the matrix powders in the solutions of precursors in volatile solvents and subsequent evaporation of the solvent. It is shown that palladium is present on the surface of the nanocomposites regardless of the synthesis procedure. As the losses of the modifier after impregnation of SnO2synthesized by FSP method were obserbed, we concluded that the properties of the SnO2surface depend on the method of obtaining matrix. It was also shown that for the materials obtained by the method of deposition from the solutions 30 - 50% Pt are present on the surface and other 50 - 70% are distributed in the bulk of SnO2. The use of pyrolysis in the flames makes it possible to increase the content of Pt on the surface up to 80%. The loss of Pt observed in both cases and attributed to the differences in the microstructure of SnO2results in the etherification of thin layers of phases of complex composition which affect the processes of superficial diffusion and evaporation. Reproducibility of the results of Pt and Pd determination indicates to a high degree of heterogeneity of the studied materials.