Study of flexible packing and stability of GaInP/GaAs solar cells

Abstract

Flexible Ⅲ-Ⅴ thin-film solar cells are usually used as space power supply in spacecrafts. In practical applications, suitable encapsulated materials can protect the cells from environmental factors such as moisture, oxidation and pollutants. Therefore, it is critical to explore suitable flexible encapsulation schemes and long-term stability of solar cell performance. In this paper, the prepared flexible GaInP/GaAs solar cells are welded by resistance welding, and then laminated with polymer encapsulation thin films and hot melt adhesives with high light transmission. After encapsulating, the flexible two-junction solar cell has good electrical performance (<i>J</i><sub>sc</sub>=13.105 mA·cm<sup>-2</sup>, <i>V</i><sub>oc</sub>=2.360 V), the photoelectric conversion efficiency can reach 24.81%, and the weight density is about 405 g/m<sup>2</sup>. The performance stability and environmental tolerance of the encapsulated flexible GaInP/GaAs solar cells under complex storage conditions are investigated. The results show that the encapsulated flexible solar cells still maintain good stability after 85℃/85%RH damp heat test for more than 1000 h and 108 cycles of thermal cycling test between -60 ℃ and 75 ℃, respectively. It also proves that the encapsulated technology adopted in this experiment is feasible and has an excellent protective effect on the double-junction solar cells. However, there is a slight decrease in the open-circuit voltage in the long-term damp heat test (Δ<i>V</i><sub>oc</sub>≈0.023 V), which may reflect the change of the solar cell itself. By further extracting the changes of the ideal factors <i>n</i><sub>1</sub> and <i>n</i><sub>2</sub> representing the recombination mechanism and diffusion mechanism respectively from the dark <i>I</i>-<i>V</i> curves (Δ<i>n</i><sub>1</sub>=1.295, Δ<i>n</i><sub>2</sub>=0.087), it can be found that the slight drop of open-circuit voltage is closely related to the recombination enhancement (Δ<i>n</i><sub>1</sub>>>Δ<i>n</i><sub>2</sub>). In the long-term high temperature and humidity environment, it is easy to introduce defects in the material of the solar cells as the carrier recombination centers, thus accelerating the carrier recombination, reducing the parallel resistance, shortening the minority carrier lifetime, and increasing the reverse saturation current resulting in a slight drop in the open-circuit voltage. In addition, the electrical simulation results based on the diode-model indicate that the change in the performance of the solar cells after flexible encapsulation is due to the enhanced carrier recombination under damp heat test, which reduces the open-circuit voltage.