Study of Enhanced-Oil-Recovery Mechanism of Alkali/Surfactant/Polymer Flooding in Porous Media From Experiments

Abstract

Summary The fluid-flow mechanism of enhanced oil recovery (EOR) in porous media by alkali/surfactant/polymer (ASP) flooding is investigated by measuring the production performance, pressure, and saturation distributions through the installed differential-pressure transducers and saturation-measurement probes in a physical model of a vertical heterogeneous reservoir. The fluid-flow variation in the reservoir is one of the main mechanisms of EOR of ASP flooding, and the nonlinear coupling and interaction between pressure and saturation fields results in the fluid-flow variation in the reservoir. In the vertical heterogeneous reservoir, the ASP agents flow initially in the high-permeability layer. Later, the flow direction changes toward the low- and middle-permeability layers because the resistance in the high-permeability layer increases on physical and chemical reactions such as adsorption, retention, and emulsion. ASP flooding displaces not only the residual oil in the high-permeability layer but also the remaining oil in the low- and middle-permeability layers by increasing both swept volume and displacement efficiency. Introduction Currently, most oil fields in China are in the later production period and the water cut increases rapidly, even to more than 80%. Waterflooding no longer meets the demands of oilfield production. Thus, it is inevitable that a new technology will replace waterflooding. The new technique of ASP flooding has been developed on the basis of alkali-, surfactant-, and polymer-flooding research in the late 1980s. ASP flooding uses the benefits of the three flooding methods simultaneously, and oil recovery is greatly enhanced by decreasing interfacial tension (IFT), increasing the capillary number, enhancing microscopic displacing efficiency, improving the mobility ratio, and increasing macroscopic sweeping efficiency (Shen and Yu 2002; Wang et al. 2000; Wang et al. 2002; Sui et al. 2000). Recently, much intensive research has been done on ASP flooding both in China and worldwide, achieving some important accomplishments that lay a solid foundation for the extension of this technique to practical application in oil fields (Baviere et al. 1995; Thomas 2005; Yang et al. 2003; Li et al. 2003). In previous work, the ASP-flooding mechanism was studied visually by using a microscopic-scale model and double-pane glass models with sand (Liu et al. 2003; Zhang 1991). In these experiments, the water-viscosity finger, the residual-oil distribution after waterflooding, and the oil bank formed by microscopic emulsion flooding were observed. In Tong et al. (1998) and Guo (1990), deformation, threading, emulsion (oil/water), and strapping were observed as the main mechanisms of ASP flooding in a water-wetting reservoir, while the interface-producing emulsion (oil/water), bridging between inner pore and outer pore, is the main mechanism of ASP flooding in an oil-wetting reservoir. For a vertical heterogeneous reservoir, ASP flooding increases displacement efficiency by displacing residual oil through decreased IFT, simultaneously improving sweep efficiency by extending the swept area in both vertical and horizontal directions. Some physical and chemical phenomena, such as emulsion, scale deposition, and chromatographic separation, occur during ASP flooding (Arihara et al. 1999; Guo 1999). Because ASP flooding in porous media involves many complicated physicochemical properties, many oil-recovery mechanisms still need to be investigated. Most research has been performed on the microscopic displacement mechanism of ASP flooding, while the fluid-flow mechanism in porous media at the macroscopic scale lacks sufficient study. In this paper, a vertical-heterogeneous-reservoir model is established, and differential-pressure transducers and saturation-measuring probes are installed. The fluid-flow mechanism of increasing both macroscopic sweep efficiency and microscopic displacement efficiency is studied by measuring the production performance and the variation of pressure and saturation distributions in the ASP-flooding experiment. An experimental database of ASP flooding also is set up and provides an experimental base for numerical simulation.

Review of surfactant-assisted chemical enhanced oil recovery for carbonate reservoirs: challenges and future perspectives

“…ASP processes utilized the benefits of three flooding methods, whereby oil recovery was significantly enhanced, by decreasing IFT, increasing the capillary number, enhancing microscopic displacing efficiency and improving mobility ratio (Shen et al 2009). However, despite these advantages, the success of the ASP projects was not without certain limitations.…”

Nanofluid of graphene-based amphiphilic Janus nanosheets for tertiary or enhanced oil recovery: High performance at low concentration

“…The film rapidly separates oil and water for slug-like oil displacement. Even though there are ways to achieve 20% enhanced recovery by complicated alkali/surfactant/polymer flooding (14) or by surfactants with added nanoparticles (5), the necessary concentrations of the chemicals and nanoparticles are much higher than 0.01 wt %. Our results provide a nanofluid flooding method for tertiary oil recovery that is comparable to the sophisticated chemical methods.…”

Measurement of Streaming Potential in Downhole Application: An Insight for Enhanced Oil Recovery Monitoring

“…Therefore, the facilities required to add chemicals in the injection water could be reduced [15]. ASP flooding is subjected to several processes in enhancing oil recovery, including interfacial tension (IFT) reduction between trapped oil phase and ASP slug [32,33], improving mobility control and sweep efficiency [34] as well as wettability alteration by surfactant to more favourable state [35].…”