Study of Characteristics of Biogas Combustion and Formation of Pollutants in Combustion Chambers

Li, Haoran; Hu, Jian; Mingazov, B. G.; Li, Weiwei; Zhen, Wen

doi:10.3103/s1068799821020148

Cited by 1 publication

(1 citation statement)

References 15 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…After that, researchers studied the factors that affect the mixing characteristics of fuel and air 7–10 and the effect of mixing characteristics on combustion characteristics 11–13 and pollutant emission characteristics 14–20 . Li et al studied the pollutant generation mechanism and the main design parameters influencing rules of natural gas (NG) and biomass gas combustion, and proposed the optimization design method of premixed and graded low‐emission combustor suitable for multifuel 21,22 . Xing et al studied a miniature hybrid nozzle using 40 external jet misflows with conical circular outlets positioned by a distribution arrangement to improve the temperature distribution uniformity of the field flow.…”

Section: Introductionmentioning

confidence: 99%

Study on combustion performance of microgas turbine combustor with different fuels

Liu

Xinci

et al. 2023

Energy Science & Engineering

View full text Add to dashboard Cite

A low‐pollution single‐tube microgas turbine combustor using different gas fuels was studied. The combustion performance of two kinds of landfill gas and natural gas was tested in a single‐head combustor. The effects of fuel nozzle position, and the fuel distribution ratio between pilot and main combustion stage on pollutant emission were investigated under rated load condition. The flow field, temperature field, and pollutant generation characteristics with different fuel nozzle diameters and nozzle positions were analyzed by numerical simulation. The results show that: the combustor can form an obvious central recirculation zone, which is convenient for ignition and stable flame propagation; in the case of limited premixed length, the influence of fuel nozzle position on fuel–air mixing uniformity is less obvious than that of fuel nozzle diameter. The fuel–air mixing uniformity plays a decisive role in the temperature field and the generation of pollutants in the combustor. The combustor has good pollutant emission characteristics, and the NOx emission can be reduced to about 10 ppmv (15% O2 concentration) under the appropriate combination of fuel nozzle diameter and position, which provides a reference for the further optimization of low‐emission combustor.

show abstract