Studies on mechanical and thermal behaviors of Al6061- SiC-Gr-ZrO<sub>2</sub> nanohybrid composites

Jagadeesh, N.; Kumar, A. P. Senthil; Janaki, S.

doi:10.1088/2053-1591/aadbf6

Cited by 5 publications

(2 citation statements)

References 11 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Wear rate is 0.03907×10 -3 mm 3 /mm for the base metal at applied load of 20 N and sliding speed of 1.282m/sec based on 490 rpm. But this value decreases to 0.01648×10 -3 mm 3 /mm for (0.4%Ti+0.2%Cu) composite for the same conditions as seen in figure (8).…”

Section: Wear Resultsmentioning

confidence: 56%

“…The results indicated that ZrB2 and SiC particles were effective to increase the hardness and tensile strength of the metal matrix composite. Jagadeesh et al (2018) [8] deal with fabrication of hybrid nano composite material including metal matrix Al6061, reinforcements of Silicon Carbide (SiC), Zirconia or Zirconium dioxide (ZrO2) and Graphite (Gr) by incoming process. These reinforcements are taken by a growing of 0.75% for each sample.…”

Section: Introductionmentioning

confidence: 99%

See 1 more Smart Citation

Development of High Performance (Mechanical and Wear Properties) of AA 6061-Hybrid Nano Composites Via Liquid Metallurgy Route

Al-Alkawi

Hanfesh

Rauof

2019

NJES

View full text Add to dashboard Cite

This research is devoted to study the influence of different weight percent concerning to the additions of Ti and Cu on mechanical and tribological properties of AA6061. The composite materials consist of different weight percentage of Ti (0.2, 0.4, and 0.6) wt% and constant weight percentage of Cu (0.2) wt% which were fabricated by liquid metallurgy route technique. Microstructural characterization and phases have been examined by using SEM (scanning electron microscopic).SEM examination showed uniform distribution of nano Ti and Cu in AA6061. The consequences of mechanical tests demonstrated clear enhancement in mechanical properties, such as ultimate tensile strength, yield strength, young modulus, ductility% and hardness at additive percentage of 0.4% Ti+0.2%Cu nano particles incorporated into molten AA6061. Percentage of enhancement ultimate tensile strength is about 73.3%, yield strength about 82.7%, young modulus is about 21.2%, the Vickers hardness about 42.6% and the decreasing in ductility was about 25.2% compared with the metal matrix (AA6061). The wear rate test was performed by using pin on disc rig for both hybrid nano composite and base metal (AA6061) under various loads (10,15and 20) N with sliding speed (1.282) m/sec at a (10) min’s time. The results showed a decrease in wear rate at 0.4%Ti+0.2%Cu compared with the base metal (AA6061). Improvement percentage of wear rate is about 105% at 20 N load.

show abstract

Section: Wear Resultsmentioning

confidence: 56%

Section: Introductionmentioning

confidence: 99%

Development of High Performance (Mechanical and Wear Properties) of AA 6061-Hybrid Nano Composites Via Liquid Metallurgy Route

Al-Alkawi

Hanfesh

Rauof

2019

NJES

View full text Add to dashboard Cite

show abstract

Analysis of Corrosion Rate of Nanohybrid AA 6351/SiC/ZrO2 Composites by Tafel Extrapolation Technique

SarithNaidu,

VenkataSubbaiah

2023

J. Inst. Eng. India Ser. D

View full text Add to dashboard Cite

Electrophoresis-deposition construction of covalently bonded interface material with enhanced thermal conductivity

Fu,

Chen,

Gao

et al. 2024

Carbon Lett.

View full text Add to dashboard Cite

Studies on mechanical and thermal behaviors of Al6061- SiC-Gr-ZrO₂ nanohybrid composites

Cited by 5 publications

References 11 publications

Development of High Performance (Mechanical and Wear Properties) of AA 6061-Hybrid Nano Composites Via Liquid Metallurgy Route

Development of High Performance (Mechanical and Wear Properties) of AA 6061-Hybrid Nano Composites Via Liquid Metallurgy Route

Analysis of Corrosion Rate of Nanohybrid AA 6351/SiC/ZrO2 Composites by Tafel Extrapolation Technique

Electrophoresis-deposition construction of covalently bonded interface material with enhanced thermal conductivity

Contact Info

Product

Resources

About

Studies on mechanical and thermal behaviors of Al6061- SiC-Gr-ZrO2 nanohybrid composites

Cited by 5 publications

References 11 publications

Development of High Performance (Mechanical and Wear Properties) of AA 6061-Hybrid Nano Composites Via Liquid Metallurgy Route

Development of High Performance (Mechanical and Wear Properties) of AA 6061-Hybrid Nano Composites Via Liquid Metallurgy Route

Analysis of Corrosion Rate of Nanohybrid AA 6351/SiC/ZrO2 Composites by Tafel Extrapolation Technique

Electrophoresis-deposition construction of covalently bonded interface material with enhanced thermal conductivity

Contact Info

Product

Resources

About

Studies on mechanical and thermal behaviors of Al6061- SiC-Gr-ZrO₂ nanohybrid composites