Исследовано влияние добавок борида никеля (Ni 3 B) на фазо-структурообразование, физико-механические свойства и устойчивость к абразивному изнашиванию порошкового материала на основе системы «железо-высокоуглеродистый феррохром (35 мас.%)». Обнаружено, что добавки Ni 3 B обеспечивают формирование многофазной микрогетерогенной структуры материала матрично-наполненного типа, состоящей из хромистой стали и твердых включений сложных карбидов хрома и железа (таких, как Ме 3 С, Me 7 C 3 , Me 23 C 6 ) и боридов (FeB, Fe 2 B), повышающих микротвердость твердой составляющей от 8,34 до 11,65 ГПа. Также выявлено, что увеличение содержания легирующей добавки от 3,5 до 8,7 мас.% улучшает устойчивость материала к абразивному изнашиванию (от 6,9 до 12,2 км/мм) и снижает твердость (от 75 до 68 HRA) и прочность на изгиб (от 1560 до 844 МПа). Методом оптической профилометрии изучены топографические особенности морфологии изношенных поверхностей для оценки глубины и локального развития процесса разрушения поверхности образцов с использованием стандартизированных параметров шероховатости, вычисленных из 2D-и 3D-профилей. Установлено, что усредненные параметры шероховатости поверхности для материалов, легированных боридом никеля, составляют, мкм: