Structural changes in composite surface material after dry polishing

Abstract

The purpose of this study was to investigate the properties of composite materials that had been heated to temperatures which may occur during dry polishing. Bulk composite material was submitted to thermal analysis from R.T. to 200 degrees C. Two distinct stages of thermal reaction in this range could be identified. One at approximately 70 degrees C, which could be related to a further initiating of unreacted groups, and one above 100 degrees C, which could be related to the glass transition. The glass transition was also observed microscopically. Hardness measurements were carried out on the warm material at different temperatures as well as on the material being cooled down to R.T. With temperature rise, a continuous increase in hardness and abrasion resistance could be demonstrated. The observed phenomena for bulk material are related to the properties measured on dry polished surfaces.

Unreacted Methacrylate Groups on the Surfaces of Composite Resins

“…It has been demonstrated by Davidson et al. 15 that the thermal effect of polishing influences the polymerization at the surface. The negative effect of polishing on the bond strength may also be correlated with the fact that about one half of the polished surface is filler.…”

Effect of Curing Light Barriers and Light Types on Radiant Exposure and Composite Conversion

“…Various methods have been used to assess the effect of composite curing . Direct measurement of the extent of the polymerization process using monomer conversion is a method of achieving a more realistic idea of how well a composite polymerizes.…”

Microstructure and Mechanical Properties of Composite Resins Subjected to Accelerated Artificial Aging

“…This concern has been expressed by various authors (1,2) who highlighted the need for a deeper understanding about the polymeric matrix and clinical strength of the materials (3).…”