Structural and transport phenomena of urocanate‐based proton carrier in sulfonated poly(ether ether ketone) membrane composite

Abstract

Proton transport is one of crucial phenomena in electrolytic part highly considered to overcome a limit in fuel cell efficiency improvement. Proton conducting organic electrolyte was modeled and simulated at atomistic level of calculation by doping of butyl urocanate (C4U), a composite material with imidazole substructure, with sulfonated poly(ether ether ketone) (SPEEK) amorphous membrane at various working temperature. Molecular dynamics simulations were used to investigate structural and dynamics characteristic of C4U in the membrane comparing with the SPEEK‐hydronium membrane model as a control. From simulations, thermal effect on water and proton carriers cluster surrounding the sulfonate groups was explored. At higher temperature, the more transport dynamics of C4U ions in SPEEK membranes were found than that of hydronium ions in the control system. Likewise, phase separation of hydrophobic and hydrophilic parts was taken into consideration here. A critical role of the enhancing proton conductivity by increasing the diffusion coefficient at temperature beyond C4U melting point in composite polymer membrane was emphasized. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018, 56, 1625–1635

Understanding of Nanophase Separation and Hydrophilic Morphology in Nafion and SPEEK Membranes: A Combined Experimental and Theoretical Studies

“…The RDFs of O s –H h exhibited the first peaks at about 1.39 Å, indicating a formation of hydrogen bonding between O s and H h (see the inset scheme in Figure 6a). This agreed well with the reports by Piyarat et al [58]. The RDFs of O s –O h displayed the first peaks at 2.33 Å.…”

Gyroid structured aqua-sheets with sub-nanometer thickness enabling 3D fast proton relay conduction

“…Following the discovery of proton-conductive fluoropolymers, e.g. , Nafion,1,2 a variety of proton-conductive membranes have been designed using aromatic polymers,3–6 block-copolymers,7 gels,8 liquid crystals,9–14 metal–organic frameworks,15 and some hybrid materials 16. It is considered that an ideal proton-conductive membrane should have properties such as high ionic conductivity, high mechanical strength, extremely low fuel (H 2 gas or MeOH) permeability, and surface morphology forming effective interfaces with catalysts.…”

Incorporating sepiolite and kaolinite to improve the performance of SPEEK composite membranes for proton exchange membrane fuel cells

“…The SPEEK membrane has less constricted water channels attached to the hydrophilic channels than commercial membranes . This phenomenon enables the SPEEK membrane to overcome swelling and water drag obstacles.…”

“…This phenomenon enables the SPEEK membrane to overcome swelling and water drag obstacles. Additionally, SPEEK polymer has greater interface and separation than Nafion due to its settled sulphonic acid group . Due to the advantages of combining both polymeric and inorganic properties, inorganic‐organic composite membranes are relatively more promising than modifying the Nafion membranes .…”