Structural and Thermoanalytical Characterization of 3D Porous PDMS Foam Materials: The Effect of Impurities Derived from a Sugar Templating Process

Abstract

Polydimethylsiloxane (PDMS) polymers are extensively used in a wide range of research and industrial fields, due to their highly versatile chemical, physical, and biological properties. Besides the different two-dimensional PDMS formulations available, three-dimensional PDMS foams have attracted increased attention. However, as-prepared PDMS foams contain residual unreacted low molecular weight species that need to be removed in order to obtain a standard and chemically stable material for use as a scaffold for different decorating agents. We propose a cleaning procedure for PDMS foams obtained using a sugar templating process, based on the use of two different solvents (hexane and ethanol) as cleaning agents. Thermogravimetry coupled with Fourier Transform Infrared Spectroscopy (TG-FTIR) for the analysis of the evolved gasses was used to characterize the thermal stability and decomposition pathway of the PDMS foams, before and after the cleaning procedure. The results were compared with those obtained on non-porous PDMS bulk as a reference. Micro-CT microtomography and scanning electron microscopy (SEM) analyses were employed to study the morphology of the PDMS foam. The thermogravimetric analysis (TGA) revealed a different thermal behaviour and crosslinking pathway between bulk PDMS and porous PDMS foam, which was also influenced by the washing process. This information was not apparent from spectroscopic or morphological studies and it would be very useful for planning the use of such complex and very reactive systems.

PDMS Based Hybrid Sol-Gel Materials for Sensing Applications in Alkaline Environments: Synthesis and Characterization

“…Furthermore, according to previous studies [68] materials with similar values were able to resist to the high pH of mortars. Figure 12 shows that the highest degradation processes of the OIH materials occurred in the range between 400 and 600 °C, which is according to the literature [70][71][72][73]. Higher weight loss is shown for the sample with a smaller 3-APTES/PDMS ratio.…”

Single catalyst particle diagnostics in a microreactor for performing multiphase hydrogenation reactions

“…Furthermore, by placing the PDMS chip on a heating stage, reactions at elevated temperatures can be performed. The thermal stability of crosslinked PDMS allows for heating up to 400 °C before it starts to degrade 31 , but in this situation more problems rise, such as the boiling of solvents or a non-uniform heating of the microreactor. In addition, the optical properties of PDMS allow for monitoring reactions with visible (laser) light, therefore allowing to perform in-line UV-vis or Raman spectroscopy.…”

Adaptive self-healing electronic epineurium for chronic bidirectional neural interfaces

“…The SHP, PDMS, and A-SEE samples were immersed in 70% ethanol solution and washed twice with PBS solution before implantation to prevent contamination and remove the PDMS precursor (see Supplementary Fig. 8) 44,45 .…”