Stress–Strain–Time Description and Analysis of Frozen–Thawed Silty Clay under Low Stress Level

Abstract

The construction of high-speed railways in cold regions needs to consider the effects of freeze–thaw cycles (FTHs) on the long-term deformation of subgrades. However, at present, research on the creep characteristics of frozen–thawed rocks and soils is not extensive. In the limited studies on frozen–thawed soil creep properties, current research focuses more on high stress–strain–time responses, but for the subgrades, the inner stress is usually low. This paper presents the results of triaxial compression creep tests on remolded, frozen–thawed silty clay sampled in the Yichun-Tieli area and describes its stress–strain–time relationship in an arctan function-based mathematical model. Each creep test condition is studied using three specimens. Frozen–thawed silty clay exhibits attenuation creep under low-level stress. In general, from 4 FTHs to 11 FTHs, the mean elasticity modulus decreases first, and then, increases. The exerted stress is higher than the yield stress; the more FTHs the specimens experience, the more time they need to be deformed stably under the same axial deviatoric stress (ADS). Under the same mean ADS, the mean stable strain of 7 FTHs exceeds the other two FTH conditions and, in general, the mean stable strain of 4 FTHs exceeds 11 FTHs. By dissecting the phenomena, it can be concluded that with FTHs increasing, moisture and voids reconstitute in the process; the elastic strain accounts for most of the total strain and significantly decides the extent of creep deformation; the arctan function-based model is basically able to describe, but not perfectly predict, the stress–strain–time relationship of frozen–thawed silty clay.