Stress–strain-based crack damage detection of composite structures using selective kernel convolutional networks and continuous wavelet transform

Long-span bridges play a crucial role in urbanization, connecting communities across vast obstacles. Structural health monitoring techniques have been deployed on these bridges, generate large amounts of data through sensor measurements, requiring data-driven approaches like deep learning (DL) for effective analysis. However, feature extraction from time-domain vibration response signals poses challenges for DL methods. To address this, the study proposes utilizing signal processing techniques such as the multivariate empirical mode decomposition (MEMD) and Wavelet transform (WT) to extract essential features for damage classification. The incorporation of MEMD and WT aims to overcome limitations and process nonstationary and nonlinear signals effectively. Three DL techniques, long-short-term memory (LSTM), one dimensional convolutional neural network (1D-CNN), multi-layer perceptron (MLP) are tuned and applied to Structural Health Monitoring of Tianjin Yonghe Bridge (located in China) as a real-world case study, in order to detect its condition by Deep signal anomaly detection and identify types of the damage. A powerful meta-heuristic algorithm called Observer-Teacher-Learner-Based Optimization, is used to optimize both hyperparameters and architecture of each DL models. The results demonstrate that the optimally tuned DLs are successful in identifying types of damage, as well as the condition of the structure, for the Tianjin Yonghe Bridge. The average accuracy values are obtained as 98.13, 97.96, and 97.79 for 1D-CNN, LSTM, and MLP, respectively. Such optimally tuned DLs are evaluated as effective solutions for detecting damage on large-scale bridges by extracting statistical time-domain and time–frequency domain features using the WT and MEMD.

show abstract

Damage detection of thin plates by fusing variational mode decomposition and spectral entropy

Lu,

Zhou,

et al. 2024

Structural Health Monitoring

View full text Add to dashboard Cite

This paper presents a new approach for damage detection in thin plates by fusing variational mode decomposition and spectral entropy (VMD-SE). In this method, after the received signal is decomposed into some intrinsic mode functions (IMFs) by variational mode decomposition (VMD), the spectral entropy ratio of the first and last IMFs is calculated for optimizing the VMD’s parameters and improving its decomposition performance. Moreover, the cross-correlation coefficient between the decomposed IMFs and the reference signal is computed to separate the desired IMF, which contains more damage information. Finally, the spectral entropy of the obtained IMF is calculated as an indicator for assessing the damage’s severity. The comparative analysis of the simulated signal clearly shows that only the proposed method can successfully separate the damage-related and reference signals. To verify the VMD-SE method, damage detection of two different types of damage on aluminum and composite fiber-reinforced polymer (CFRP) plates is conducted by using this new approach. The experimental results demonstrate that the parameters of VMD affect greatly its decomposition performance, and the best parameters are selected. The results also indicate that the normalized spectral entropy monotonically increases when the diameter of the through-hole or the length of the scratch increases. In addition, the correlation coefficients of the fitting lines of the plates are larger than 0.998. The experimental results of aluminum specimens demonstrate that the damage’s location has an influence on the normalized spectral entropy. At last, based on the linear relationship, the severity of damage in the fourth specimen is identified. The identification results demonstrate that the relative error of the aluminum and CFRP plates is less than 7.34%, which indicates that this new algorithm by fusing VMD and spectral entropy can detect the damage size in thin plates accurately and efficiently.

show abstract

Stress–strain-based crack damage detection of composite structures using selective kernel convolutional networks and continuous wavelet transform

Cited by 4 publications

References 42 publications

A Lightweight Algorithm for Detecting Smoke in Forests without Open Flames

A Lightweight Algorithm for Detecting Smoke in Forests without Open Flames

Optimal tuning of three deep learning methods with signal processing and anomaly detection for multi-class damage detection of a large-scale bridge

Damage detection of thin plates by fusing variational mode decomposition and spectral entropy

Contact Info

Product

Resources

About