Stress anisotropy and wave propagation: a micromechanical view

Abstract

Wave propagation is a constant-fabric macrophenomenon, suitable to microinterpretation. Both velocity and attenuation characterize state, including inherent and stress-induced anisotropy. The purpose of this research is to study the effect of isotropic and deviatoric stresses on wave propagation in particulate materials at low strains and to interpret results at the microlevel. A resonant-column device was midified to allow for the application of axial extension and axial compression deviatoric loading. The fixed-free boundary condition of the sample was maintained. Data for round, hard-grained sand show that shear wave velocity and attenuation are primarily dependent on the mean stress on the polarization plane, with minimal effect of the deviatoric component, in agreement with prior observations at stress ratios less than 2–3. Attenuation is strongly correlated with the mean stress in the polarization plane and the level of shear strain. Damping does not vanish at low strains, contrary to predictions based on hysteretic behaviour; hence, other loss mechanisms must take place at low strains. Low-strain wave parameters are adequately corrected for mid-strain using modified hyperbolic models. Measured velocity and damping trends during isotropic and anisotropic loading qualitatively agree with predictions based on regular arrays. Key words: mechanical waves, resonant column, damping, shear modulus, stress anisotropy, random vibration.

Influence of packing density and stress on the dynamic response of granular materials

“…[4,5]) or frequency domain techniques (e.g. [6][7][8][9]). This paper explores whether additional information, i.e.…”

Two-dimensional discrete element modelling of bender element tests on an idealised granular material

“…(Note that the effect of small geometrical perturbations of the lattice is considered by O'Sullivan et al [19] and Velicky and Caroli [20].) Also relevant is the analytical work of Santamarina and Cascante [26], who considered the stiffness of regular packings of monodisperse and polydisperse spheres. Their work included a review of the analytical relations between fabric, grain properties and the effective overall system for threedimensional regular assemblies of uniform spheres.…”

“…They observed similarities between the response trends predicted analytically for ideal systems and empirical relationships derived for real physical soils. Just as in the case of the work by [26], the system chosen for consideration here is very stable and, under small perturbations, there is no change in contact configuration, i.e. the material can be considered elastic as plasticity is associated with contact breakage and sliding (in the absence of grain breakage).…”

The influence of void ratio on small strain shear modulus of granular materials: A micromechanical perspective

“…Theoretical solutions such as the Hertz-Mindlin contact theory are available to relate the small strain shear modulus to microscopic properties like particle stiffness and Poisson's ratio, void ratio, and coordination number [3]. For regular packing assemblies, Fig.…”