Strength optimization of low-pressure transient liquid phase bonded Ti–6Al–4V similar joint with Cu–Ni multi-interlayer

Influence of Nickel Content on the Formation of an Interaction Zone during Contact Melting of Titanium with Copper-Nickel Alloys

“…The work [11] shows that Cu/Ni coatings on the surface of titanium after heat treatment have high adhesive strength. Due to their strength characteristics, the alloys of the Cu-Ni-Ti system have found wide use as brazing materials for joining titanium alloys [12,13].…”

Dissimilar transient liquid phase bonding of Ti-6Al-4V alloy to Inconel 625 superalloy: effect of bonding temperature on microstructural evolutions and mechanical properties

“…Therefore, at a constant temperature, solidification occurs. This is called isothermal solidification, which is more convenient than solidification by cooling [11,12,21,[13][14][15][16][17][18][19][20]. In previous studies, similar and dissimilar TLP bonding of several Ni-based superalloys such as IN-617 [22][23][24][25], IN-939 [16,[26][27][28],…”

Dissimilar transient liquid phase bonding of Ti-6Al-4V alloy to Inconel 625 superalloy: Effect of bonding temperature on microstructural evolutions and mechanical properties

“…Therefore, at a constant temperature, solidification occurs. This is called isothermal solidification, which is more convenient than solidification by cooling [11,12,21,[13][14][15][16][17][18][19][20]. In previous studies, similar and dissimilar TLP bonding of several Ni-based superalloys such as IN-617 [22][23][24][25], IN-939 [16,[26][27][28],…”