Stiffness Modelling and Performance Evaluation of a Soft Cardiac Fixator Flexible Arm with Granular Jamming

Abstract

To meet the practical application requirements of cardiac fixation during off-pump coronary artery bypass surgery, a soft cardiac fixator with a flexible arm was previously designed. To enable the soft cardiac fixator to adapt to uncertain external forces, this study evaluates the variable-stiffness performance of the flexible arm. First, the flexible arm was simplified as a soft silicone manipulator measuring 60 mm × 90 mm × 120 mm, which can actuate, soften, or stiffen independently along the length of the arm by combining granular jamming with input pressure. Then, the soft manipulator was modelled as a cantilever beam to analyse its variable-stiffness performance with granular jamming. Next, based on theoretical analysis and calculations, many experiments were conducted to evaluate the variable-stiffness performance of the soft manipulator. The experimental results demonstrated that the variable-stiffness performance is influenced by the flexible arm length, the size of the granules, and the input pressure.

Characterisation of Antagonistically Actuated, Stiffness-Controllable Joint-Link Units for Cobots

“…By air pressurization, omnidirectional stiffness variation can be achieved. On the other hand, modeling approaches have been proposed to control the compliance of this kind of links [13], [14]. Besides, variable stiffness joints driven by soft actuators have been increasingly explored [15]- [17].…”

A Variable Stiffness Electroadhesive Gripper Based on Low Melting Point Alloys

“…Soft robots equipped with variable stiffness functionality can boost safety when considering physical human–robot cooperation [ 12 , 13 ] and load capacity [ 14 ]. Variable stiffness methods include the blocking principle [ 15 , 16 ], the principle of variable stiffness structures, and the principle of smart materials. The blocking principle is based on negative pressure [ 17 ]; through air suction, materials within a soft and enclosed chamber are compressed, and their stiffness is increased, which ordinarily requires a large powder air pump and air system and increases the system’s complexity.…”