Squirrel Cage Induction Motor Design and the Effect of Specific Magnetic and Electrical Loading Coefficient

Abstract

3-phase induction motors are widely used in industrial applications such as pumps, blowers, compressors, conveyors, etc. In addition, single-phase motors also have domestic use. For this reason, the design of the induction motor is of great importance. During the design, according to the parameters given as input, there are many situations that are contradictory to each other in order to achieve the goal. For example, if high efficiency is required, the motor size and the price will increase, and if lower price is required, other performance characteristics should be ignored. In the practical design of an induction motor, the designer has to comply with a number of constraints because of the large number of input variables. For this reason manual calculation becomes a very long and difficult process. To overcome this tiresome process, it is necessary to create a computer aided program or simulation model to determine the induction motor design parameters. In induction motor design, many parameters directly affect motor performance. Therefore, the selection of these parameters is of great importance. The output coefficient (C0), which takes place in the first steps of the design process, also has a great influence on the motor design. In this paper, a program for optimizing design of 3-phase induction motors written in MATLAB is presented. The structure of the program is modular and therefore can be modified for the various requirements of the induction motor design. C0 constant, one of the design parameters, also varies with some other parameters. The most important ones are the specific electrical loading coefficient (A1) and the specific magnetic loading coefficient (Bav), making dramatic effect on the output coefficient. The effect of the variation of the C0 constant on the performance of the induction motor was investigated in the study. Stator inner and outer diameter, stack length, stator and rotor slot parameters, equivalent circuit parameters, losses and efficiency was obtained according to the change of Bav and A1 values. The obtained results are given and interpreted in tables and graphs.

Üç Fazlı Bir Asenkron Motorun Çeşitli Bobin Adım Biçimi ile Performans ve Harmonik Analizi

“…Since this study aims to compare the performance of the motor with different stator coil pitches, a motor design was not performed from scratch, instead, the parameters of the designed motor in (Yetgin et al, 2019) were used for analysis. The general data of the motor under consideration are given in Table 1.…”

An Analytical Model of Induction Motors for Rotor Slot Parametric Design Performance Evaluation

“…Two magnetic circuits in transformers, referred to as primary and secondary windings, are isolated by a small air-gap. The circuits can be represented as two relatively movable windings which are called stator and rotor in the induction motor [14], [15]. The stator winding of the three-phase squirrel cage induction motor is connected to the three-phase AC source either in a star or delta configuration.…”

“…1. Power flow diagram of induction motor [15], [16], [17] Total power loss of induction motor can be calculated as follows:…”

Optimal Stator and Rotor Slots Design of Induction Motors for Electric Vehicles Using Opposition-Based Jellyfish Search Optimization

“…Stator slot geometries become the most relevant part of the IM performance enhancement because of the influence of stator resistance and leakage reactance on the three performance indicators [46]. The stator slot design in this work is based on stator shape, as illustrated in Figure 2.…”