Smart pH-Responsive Polyaniline-Coated Hollow Polymethylmethacrylate Microspheres: A Potential pH Neutralizer for Water Purification Systems

Abstract

Smart materials with potential pH controllability are gaining widespread concern due to their versatile applicability in water purification systems. A study presented here demonstrates a successful synthesis of smart pH-responsive polyaniline (PANI)-coated hollow polymethylmethacrylate microspheres (PHPMs) using a combination of solvent evaporation and in situ coating techniques. The material was characterized by using conventional techniques. Images recorded by an optical microscope displayed clear evidence in support of the coating, which was further supported by the SEM images. Surface roughness due to the coating was distinct in the SEM images. The PANI coating has enabled the microsphere to effectively neutralize the pH of water in water purification systems, which is very important in tackling the excessive acidic or basic problem of water resources. This study introduces a simple, facile, and cost-effective synthetic route to develop polyaniline-coated hollow polymethylmethacrylate microspheres with high performance as a pH-responsive material for water purification. The low density of the material and relatively large surface area compared to conventionally used chemicals further enhance the application prospect of the material.

Nanomembranes-Affiliated Water Remediation: Chronology, Properties, Classification, Challenges and Future Prospects

“…The retention rates for Fe 3+ solutions with PVP and dextran were found to be 62% and 48%, respectively, at pH 3.0, for an 80 min filtration period, while the retention for Fe 3+ solution without any complex-forming polymer was just 14%. The membranes were examined by AFM analysis and contact angle measurements [ 77 ].…”

Critical Review on Synthetic Routes and Catalytic Applications of Hollow Nanomaterials

“…[76] Multishelled and sphere-in-sphere hollow structures of titania results after different heat treatment for the seeded polymerization of polystyrene-divinylbenzene and infiltration process of titania sol within polymer beads. [77] According to Gao and coworkers CdTe nanotubes may also prepared employing 1-D Cd-thioglycolic acid nanowire in the form of hard template. [78] As NaHTe added in the aquous solution of Cd-Thioglycolic acid snanowires, turns into dark brown CdTe.…”