Slope traversal controls for planetary exploration rover on sandy terrain

Abstract

In this paper, two control approaches are presented for exploration rovers traversing sandy-sloped terrain. One of the proposed controls is a model-based feed-forward control using a characteristic diagram, called a Thrust-cornering characteristic diagram. It consists of various characteristic curves of wheel forces for varied wheel slip conditions. An appropriate steering maneuver for slope traversal can be found using the diagram with slope traversal criteria. The other control is a sensor-based feedback control. A key approach to this feedback control is to compensate for three types of slip, namely, the vehicle sideslip and longitudinal/lateral slips of a wheel. The feedback control calculates both steering and driving maneuvers that can compensate for these slips and also allow the rover to successfully traverse a sandy slope. The performances of these two control approaches are confirmed in slope traversal experiments using a four-wheeled rover test bed. The proposed controls are verified by quantitative evaluations of distance and orientation errors. Through the experiment, it was found that the two controls have advantages and disadvantages, and the possibility of merging the model-based control and the sensor-based control is discussed.

Improving Robot Mobility by Combining Downward-Looking and Frontal Cameras

“…This stereo system permits the height variation existing in non-flat terrains to be compensated for. A smart solution for increasing the applicability of downward-looking cameras to uneven terrain conditions appears in [17,18]. In particular, a telecentric lens is inserted in front of the camera head.…”

Accurate estimation of drawbar pull of wheeled mobile robots traversing sandy terrain using built-in force sensor array wheel

“…Hence, in this study, we use the BFSA-wheel to obtain σ(θ) directly from force sensor array and estimate the drawbar pull using Equations (9) and (10). Since c and φ are inherent parameters of soil and are constant, so they are identified in advance.…”

“…The feature of the system is that telecentric optics keeps the same field of view with a change of distance between the camera and the ground, so that the visual odometry is applicable on loose soil. An overview of this system is presented in [10], and a detailed explanation of this system will be reported in another paper.…”

Four-wheel Rover’s Motion Control and Modeling Method

“…At the same time, it controls torque to make the planetary rover minimize the energy consumption on flat terrain, and the driving ability is the maximum in rough terrain. Kazuya Yoshida analyzed and studied that the relationship of load-traction factor versus the slip ratio is modeled theoretically [8][9]. The method is based on wheel soil interaction theory, using the wheel slip ratio as the state variable.…”