Sizing carbon fiber by in situ polymerization of maleic acid and glycerol for reinforcing polyamide 66

Yao, Lili; Lu, Youming; Zhang, Chenyang; Yang, Shulei; Yang, Changchun

doi:10.1002/app.52328

Cited by 6 publications

(2 citation statements)

References 38 publications

(52 reference statements)

Supporting

Mentioning

Contrasting

Order By: Relevance

“…The highest shear strengths of LFAM and PFAM are 83.5 kPa and 87.6 kPa at the filler-asphalt ratio of 1.2, respectively, showing a significant increase in shear strength. This indicates that the added fibers serve as the reinforcing and bridging roles in PSAM [17]. The reason is that the physical and chemical interactions occur between fibers and asphalt, such as adsorption, diffusion, chemical bonding, etc.…”

Section: Afm Testmentioning

confidence: 99%

Effects of Filler-Asphalt Ratio on the Properties of Lignin and Polyester Fiber Reinforced SMPU/SBS Modified Asphalt Mortar

Xia¹,

Wang²,

Xu³

et al. 2023

Journal of Renewable Materials

View full text Add to dashboard Cite

To understand the effects of filler-asphalt ratio on different properties of lignin and polyester fiber reinforced shape memory polyurethane (SMPU)/styrene butadiene styrene (SBS) composite modified asphalt mortar (PSAM), as well as to reveal the reinforcing and toughening mechanisms of lignin and polyester fibers on PSAM, SMPU, SBS and mineral powder were first utilized to prepare PSAM. Then the conventional, rheological and anticracking properties of lignin fiber reinforced PSAM (LFAM) and polyester fiber reinforced PSAM (PFAM) at different filler-asphalt ratios were characterized. Test results indicate that the shear strength, deformation resistance and viscosity are increased after adding 0.8wt% lignin fiber or polyester fiber and increasing the filler-asphalt ratio from 0.8 to 1.2. The optimal filler-asphalt ratio of 1.0 is proposed after comprehensive performance assessments of PSAM. Polyester fiber shows a better reinforcing effect than lignin fiber, but its improvement in the thermal stability of PSAM is not significant at high temperatures. Additionally, the complex modulus, storage modulus, loss modulus and rutting resistance factor of PSAM are improved after adding lignin fiber and polyester fiber, as well as show an increasing trend as the filler-asphalt ratio is raised, but the phase angle is gradually decreased. Further, the increase of elastic components in PSAM effectively enhances the anti-deformation ability of PSAM at high temperatures, and polyester fiber more obviously improves the high-temperature deformation resistance of PSAM than lignin fiber. Finally, the anti-cracking performance of PFAM and LFAM at low temperatures is reduced by 74.2% and 46.7%, respectively, as the filler-asphalt ratio is raised from 0.8 to 1.2. The low-temperature anti-cracking performance of LFAM is lower than that of PFAM at the same filler-asphalt ratio, even lower than that of PSA. Compared with lignin fiber, the anti-cracking performance and deformation resistance of PSAM at low temperature is more greatly enhanced by polyester fiber.

show abstract

Section: Afm Testmentioning

confidence: 99%

Effects of Filler-Asphalt Ratio on the Properties of Lignin and Polyester Fiber Reinforced SMPU/SBS Modified Asphalt Mortar

Xia¹,

Wang²,

Xu³

et al. 2023

Journal of Renewable Materials

View full text Add to dashboard Cite

show abstract

“…Because of their low weight, superior mechanical properties and high temperature resistance, carbon fibers (CF) have widely applied to composites materials, like structural stressed parts of aerospace and aviation, automotive and naval vessels. [1][2][3] Recent advances in polymer synthesis and composite processing technologies have enabled the use of thermoplastic resin in long CF composites. [4][5][6] Thermoplastic resins offer several advantages, such as fast forming, impact resistant, and easy to recycle, compared to thermoset resin.…”

Section: Introductionmentioning

confidence: 99%

Enhancement of interfacial properties of carbon fiber reinforced polyphenylene sulfide resin by sulfur treatment

Yang

Zhang

et al. 2023

J of Applied Polymer Sci

Self Cite

View full text Add to dashboard Cite

The properties of carbon fiber (CF) reinforced thermoplastic resin composites depend on the physical and chemical interaction between the fibers and the resins. However, surface oxidation is not always necessary. In this study, the interaction between CF and Polyphenylene sulfide (PPS) is enhanced by using an emulsion of reactive sulfur to treat the CF surface. The interlaminar shear strength (ILSS) of CF/PPS composites is experimentally investigated and found to be up to 79.7 MPa, an increase of 36.1% compared to the untreated CF. The enhancement mechanism of the modification method established is inferred. Scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS) results showed that sulfur etching on the surface of CF generated new functional groups, which improved the interfacial effect, and tightened the bond between CF and PPS. This indicates that sulfur treatment along with sizing must be a simpler method than surface oxidation to promote the interfacial bonding between CF and PPS.

show abstract

Recent progress on interface characterization methods of carbon fiber reinforced polymer composites

Yuan,

Zhang,

et al. 2024

Chemical Engineering Journal

View full text Add to dashboard Cite

Sizing carbon fiber by in situ polymerization of maleic acid and glycerol for reinforcing polyamide 66

Cited by 6 publications

References 38 publications

Effects of Filler-Asphalt Ratio on the Properties of Lignin and Polyester Fiber Reinforced SMPU/SBS Modified Asphalt Mortar

Effects of Filler-Asphalt Ratio on the Properties of Lignin and Polyester Fiber Reinforced SMPU/SBS Modified Asphalt Mortar

Enhancement of interfacial properties of carbon fiber reinforced polyphenylene sulfide resin by sulfur treatment

Recent progress on interface characterization methods of carbon fiber reinforced polymer composites

Contact Info

Product

Resources

About