Single mode condition of polymeric Y-junction rib waveguide

Abstract

Single mode propagation is an important requirement for optical waveguide devices for use with single-mode fiber, it can reduce the coupling loss .In this paper , a technique is used for calculating the field distribution of the polymeric Y-junction rib waveguide. The technique is based on the combination of the effective index method(EIM) and the variational method(VM).it is mixed between the advantages of each method and avoided their disadvantages, where EIM can make the calculations procedures simple but it has some difficult to find the field distribution ,other wise ,VM can be used with very good accuracy to find the field distribution. An algorithm is implemented to study the effect of the structure parameters on the field distribution of the polymeric Y-junction rib waveguide . In our simulation, the core layer is PU-FTC (n=1.65@1.3µｍ)，the cladding layers were NOA73 (n=1.54@1.3µｍ) and Epoxylite9653 (n=1.54@1.3µｍ).The obtained single mode rid waveguide structure parameters are：the core thickness is 1.5µｍ，the rib height is 0.2µｍ， the rib width is 5µｍ.

The Ionic Palladium Porphyrin as a Highly Efficient and Recyclable Catalyst for Heck Reaction in Ionic Liquid Solution Under Aerobic Conditions

“…was prepared according to our reported work [31]. The obtained 2 (0.5 mmol) and PdCl 2 (0.6 mmol) was added into 20 mL deionized water.…”

The Research of Fiber Optic Gyroscope Error Based on Insertion Loss and Beam-Splitting Ratio of Y-Waveguide

“…Beam-splitting ratio and insertion loss are the most basic y-waveguide modulator parameters, they are the guarantee of their normal work. This article will focus on these 2 parameters measurement, analyse the main factors to affect the measurement of result [5], study the effects of temperature on these two parameters and of the error to the gyro output on the two parameters.…”