We demonstrate a single-frequency wavelength tunable erbium-doped fiber (EDF) ring laser. We used an unpumped-EDF as a saturable-absorber in order to obtain a stable single-frequency with a narrow-linewidth single-polarization mode in the ring cavity. The lasing wavelength was controlled by using bending-induced strain, such as tension and compression strain corresponding to the bending direction, applied to the fiber gratings. The fiber laser exhibited an output power of -1.85 dBm at a wavelength of 1540.72 nm for a pumping power of ~400 mW. An extinction ratio was measured to be more than 60 dB. The proposed tunable fiber laser maintains nearly the same output power while its lasing wavelength is controlled over in a wavelength range of 5 nm.
I. 서 론광섬유 레이저는 광섬유 광학(fiber-optic) 시스템의 광원으 로서 계속적으로 많은 연구가 이루어지고 있다. 특히 모드 호핑(mode hopping) 없이 발진파장을 변환할 수 있는 단일 주파수(종모드) 광섬유 레이저는 wavelength division multiplexing (WDM), coherent 통신 시스템, 광 센서 시스템 등에서 높은 활용성을 가지고 있다 [1][2][3][4] . 그러나, 광섬유 레이저는 보통 긴 공진기 길이와 좁은 종모드간 간격으로 인하여 발생하는 모 드 호핑 현상과 함께 다수의 주파수 모드로 동작한다. 이러 한 모드 호핑 현상을 억제하기 위하여 긴 길이의 Fabry-Perot 레이저 공진기에 unpumped 어븀 첨가 광섬유를 포화 흡수체 (saturable-absorber)로 사용하여 레이저의 선폭을 좁히고 단 일모드로 동작하도록 한 연구가 발표되었다 [5] . 그러나 일반 적으로 레이저가 단일 종모드로 발진하기 위해서는 레이저 광이 이득매질 내에서 진행파 (travelling wave)의 형태를 가 짐으로써 단일모드 발진을 저해하는 공간적인 hole burning 현상이 생기지 않도록 해야 하므로 링 형태의 광섬유 레이저