Simultaneous seismic inversion study for channel sandstone identification, northern part of the Eastern Shelf, King County, North-Central Texas

Abstract

This paper documents the results of a prestack simultaneous seismic inversion conducted to investigate the Wolfcampian lower Tannehill sandstone channels within a mixed carbonate siliciclastic system in the northern Eastern Shelf in King County, North Central Texas. Previous exploration methods for the Tannehill sandstone were based largely on well-log correlation which, because of their widely spaced sample points, are not optimal for channel delineation. We have generated crossplots of P- and S-wave velocity ratios ( VP/ VS ratios) versus P-impedance to determine lithologic types. We then used 3D seismic data and wireline logs to implement a prestack simultaneous seismic inversion procedure to generate P- and S-impedances, density, and VP/ VS ratio volumes to identify the valley-fill Tannehill lowstand systems. Our results find that (1) based on impedance and density, the sandstone-rich channels can be easily separated from the carbonate-rich zones but are difficult to distinguish using VP/ VS. (2) Although there appeared to be several channel systems in the area of investigation, two of these, hereby referred to as channel A and channel B, are recognized to be the key contributors of sandstone sediments to the shelf edge, slope, and basin areas. (3) Of these two channels, channel A is the larger and highly sinuous; it is associated with a meander loop, a point bar, and an abandoned channel. At the point-bar location, channel A has a width of 890 m (2920 ft) and a depth of 29 m (94 ft). The point bar is structurally anticlinal and thus constitutes a potential exploration target. In contrast, channel B is less sinuous, without any associated point bar. It has a maximum depth and width of 23 m (75 ft) and 270 m (886 ft), respectively. Finally, the inversion results suggest that other potential Tannehill sandstone reservoirs may still be present elsewhere within King County.