Simultaneous Investigation of PEMFC Performance and Water Content at Different Flow Rates and Relative Humidities

Abstract

In order to prevent membrane dehydration and flooding in proton exchange membrane fuel cells (PEMFC), appropriate water management must be done. Therefore, accurate knowledge of the effects of various parameters on cell water content is needed. This knowledge helps to achieve optimum cell performance. The effects of both anode and cathode stoichiometry and relative humidity on single serpentine PEMFC performance and flow channel water content are surveyed experimentally. All tests conducted on transparent fuel cell with serpentine flow field channels and 25cm2 MEA active areas. Digital image processing is performed on the captured images of cathode channel to detect accumulated water at that side. The results indicate that there is a correlation between water content of cathode flow channels and cell performance. Increasing cathode water content causes membrane hydration which leads to better cell performance, but high water content causes flooding. It is concluded that both stoichiometry and relative humidity have significant effect on cell performance. Increasing reactant relative humidity improves water transport mechanisms within the cell, but fully humidified reactants may causes flooding. Although high stoichiometry rate prevents flooding and facilitate reactants transport within catalyst layer, high anode and cathode stoichiometry leads to membrane dehydration. Experimental observation shows that both stoichiometry and relative humidity have optimum value.

Thermodynamics Investigation and Artificial Neural Network Prediction of Energy, Exergy, and Hydrogen Production from a Solar Thermochemical Plant Using a Polymer Membrane Electrolyzer

“…The membrane electrolyzer transfers polymer molecules containing water and protons and decomposes them into oxygen, protons, and electrons. The electrons leave the cell from an external circuit, combine with protons in the cathode, and release hydrogen [ 11 ]. The reactions in the cathode and anode of the polymer membrane electrolyzer are as follows: The anode The cathode The whole reaction …”

“…The current density ( ) is linearly related to the ohmic voltage drop. The ohmic voltage drop is the resistance of the electrolyzer against the transfer of protons and is defined as follows [ 11 ]. where is the ionic conductivity of the Nafion membrane in terms of [ 41 ].…”

“…As a consequence of this reaction, water is produced, which can be used to make oxygen for breathing and hydrogen to fuel the electrolyzer. Every electrolyzer cell contains polar plates, an anode, and a cathode, as well as electrolytes and catalysts in the gas diffusion layer [ 11 ]. Electrolyzer technology is divided into four general categories: alkaline electrolyzers, whose electrolyte is a liquid (such as potassium hydroxide); proton and anion exchange membrane electrolyzers, both of which have a solid polymer electrolyte; and finally, solid oxide electrolyzers, which have ceramic membranes.…”

A novel experimental and machine learning model to remove COD in a batch reactor equipped with microalgae

“…The rejection was calculated, and the oil content in the permeate was examined using the chemical oxygen demand test. Bozorgnezhad et al (2015a), Hasheminasab et al (2014 studied the proton exchange membrane fuel cell (PEMFC) as a renewable energy source and replacement for internal combustion engines. They believe characterizing and researching the two-phase flow phenomena of PEMFC as floods are essential to effective water management.…”

Experimental Investigation and Proposal of Artificial Neural Network Models of Lead and Cadmium Heavy Metal Ion Removal from Water Using Porous Nanomaterials

“…Heavy metals include mercury, arsenic, cadmium, lead, nickel, copper, iron, chrome, vanadium, and others with different boiling points [7,8]. Metal industries, electroplating, paint making, battery making, tanning, textile, paper making, and other similar industries are among sources of environmental pollution related to heavy metal emissions [9][10][11]. These cause pollution in the environment by disposing of and releasing elements such as cadmium, mercury, nickel, lead, chrome, copper, silver, and others.…”