Simultaneous Design of Circular Pad and Double Side Compensation Network for Dynamic Wireless Power Transfer

Esfahani, Ebrahim Nasr; Bhattacharya, Indranil; Adepoju, Webster

doi:10.1109/emcsi39492.2022.9889510

Cited by 2 publications

(1 citation statement)

References 14 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…While the optimization process yielded three resonant frequency points as shown in Figure 13, only the design parameters corresponding to the lowest optimal resonant frequency (750 kHz) was harnessed for the experimental prototype. Moreover, the selection of 750 kHz frequency is based on practical integration with wireless charging systems that operate at 85 kHz, consistent with Airfuel Alliance Standard [33], [34]. The optimal design parameters for the 750 kHz resonant frequency were used to fabricate the MTM structure, and experimental testing was conducted to verify the accuracy of the optimization process, as described in Section IV.…”

Section: ) Design Parameter Optimization Constraintmentioning

confidence: 99%

Metaheuristic-Based Optimization and Prototype Investigation of Low Frequency Metamaterial for Wireless Power Transfer Application

Adepoju,

Bhattacharya,

Sanyaolu

et al. 2023

IEEE Access

Self Cite

View full text Add to dashboard Cite

The adoption of wireless charging technologies for consumer and industrial applications is inhibited by concerns over reliability culminating from the fluctuating output power, low transmit power, and power transfer efficiency (PTE) of these systems. Besides, the inherently high radio and microwave resonant frequency of existing Metamaterial (MTM) designs imposes high switching stress on power switches and passive components, leading to significant power loss and enormously high degradation in system performance. This manuscript presents a compact, low-frequency MTM-based Wireless Power Transfer (WPT) structure coupled with a comprehensive investigation of the effect of physical parameters on the resonant frequency where left-handed characteristics occur. Model design and simulation were conducted in ANSYS High-Frequency Structure Simulator (HFSS) to extract the transmission coefficient and reflection coefficient while realizing negative permeability at a resonant frequency (f o ) of 1.2MHz. To further mitigate the resonant frequency of the MTM, a metaheuristic-based parameter optimization algorithm was implemented to achieve negative permeability and evanescent wave amplification at a resonant frequency of 750kHz, making it suitable for high-power WPT applications. A prototype MTM sample is fabricated for experimental measurement of power transfer efficiency and medium parameters, using the Keysight ENA5061 Vector Network Analyzer (VNA), effectively confirming the validity of the proposed design. The excellent efficiency enhancement and mutual coupling make the design an attractive solution for WPT applications. A close agreement between the experimental results and numerical simulation validates the accuracy of the optimization results.INDEX TERMS Wireless power transfer, finite element analysis (FEA), metamaterial (MTM), power transfer efficiency, ANSYS, high frequency structure simulator, vector network analyzer, optimization. I. INTRODUCTIONWireless Power Transfer (WPT) has been widely studied and implemented in various applications, including mobile computing [1], wireless charging of biomedical body implants [2],The associate editor coordinating the review of this manuscript and approving it for publication was Diego Masotti . and Electric Vehicles (EV) [3]. This technology was first discovered by Nikola Tesla in 1891 [4], and since then, significant research progress has been made. In 2007, researchers at MIT demonstrated the potential for efficient long-distance wireless power transmission using magnetic resonant coupling [5], and recently, Oak Ridge National Laboratory designed a 120-kilowatt WPT prototype for the wireless

show abstract

Section: ) Design Parameter Optimization Constraintmentioning

confidence: 99%