Simulation of Fibrillation of PC/LCP/Kevlar Blends and Its Characterizations

Abstract

Summary: Kevlar fiber was fluorinated and oxy-fluorinated directly in presence of undiluted fluorine and fluorine gas mixture and processed with Polycarbonate and LCP at 320 8C under 20 rpm in a twin-screw extruder. The composites were then injection molded into dumbbell shaped specimens under different conditions like various mold temperatures, injection temperatures, injection speeds and mold filling rates. Various physico-chemical characterizations have been performed under definite processing parameter. Orientation of fibers under different injection parameters was evaluated using mold flow simulation technique. Most injection molded or extruded structures however, exhibit non-uniform fiber orientation across the final parts, with a diverging variety of different local fiber orientation states. Distinct skin and core regions were observed in the injection molded parts and it has also been found out that fiber orientation is different in skin and core region for both unmodified and modified derivative, which affects the flow behavior. Processing parameters significantly affect the fiber orientation pattern in the skin and core region for all blended materials. It is worth mentioning that the maximum fiber orientation occurred during the extrusion process at the wall but different extent of fiber orientation is observed during the injection molding depending on the shape of the dumbbell specimen. This fibrillation has been corroborated by the SEM study in both the skin and core region.