Simulation-based dynamic model and speed controller design of a small-scale turbojet engine

Abstract

Purpose This paper aims to present a nonlinear mathematical model of a small-scale turbojet aeroengine and also a speed controller design that is conducted for the constructed nonlinear mathematical model. Design/methodology/approach In the nonlinear mathematical model of the turbojet engine, temperature, rotational speed, mass flow, pressure and other parameters are generated using thermodynamic equations (e.g. mass, energy and momentum conservation laws) and some algebraic equations. In calculation of the performance parameters, adaptive neuro fuzzy inference system (ANFIS) method is preferred in related components. All calculated values from the mathematical model are then compared with the cycle data of the turbojet engine. Because of the single variable control need and effect of noise factor, modified proportional–integral–derivative (PID) controller is treated for speed control. For whole operation envelope, various PID structures are designed individually, according to the operating points. These controller structures are then combined via gain-scheduling approach and integrated to the nonlinear engine model. Simulations are performed on MATLAB/Simulink environment for design and off-design operating points between idle to maximum thrust levels. Findings The cascade structure (proposed nonlinear engine aero-thermal model and speed controller) is simulated and tested at various operating points of the engine and for different transient conditions. Simulation results show that the transitions between the operating points are found successfully. Furthermore, the controller is effective for steady-state load changes. It is suggested to be used in real-time engine applications. Research limitations/implications Because of limited data, only speed control is treated and simulated. Practical implications It can be used as an application in the industry easily. Originality/value First point of novelty in the paper is in calculation of the performance parameters of compressor and turbine components. ANFIS method is preferred to predict performance parameters in related components. Second novelty in the paper can be seen in speed controller design part. Because of the single variable control need and effect of noise factor, modified PID is treated.

A scientometric analysis and critical review of gas turbine aero-engines control: From Whittle engine to more-electric propulsion

“…In Table 2, scientometric survey data in the Histcite are shown. As shown in Table 2, the number of articles reviewed in scientometrics is 111, 12…”

A Comparative Study on The Tuning of The PID Flight Controllers Using Swarm Intelligence

“…According to the results, performance of the system can be improved compared to the classical PID controllers. A PID speed controller is proposed in [20] for a small-scale turbojet engine where a modification is added to the classical controller scheme. A low-pass filter is added to the differential term to reduce the noise in case of high frequencies.…”

Research on Applications of Mini-Turbojet and Turbojet Engined Military Uavs

“…Increasing the weight is a problem in aircraft design. Gas turbine engines are the engines that can fly at every altitude and produce high-speed, torque and bleed air [11,12] Characteristic factors of the motors used in unmanned aerial vehicles differ on size, fields of use, etc. The engine used for a UAV for the purpose of reconnaissance may not provide the required efficiency when it is integrated into the UAV that will be used in another field.…”