Simple fabrication scheme for sub-10 nm electrode gaps using electron-beam lithography

Abstract

An innovative and simple method, based on electron-beam (e-beam) overlapping and overexposure techniques, is developed to fabricate sub-10 nm electrode gaps with very good electrical properties. Gaps with 4 to 10 nm spacing can be fabricated using a proper e-beam dose and pattern-developing time. The fabrication yield is nearly 100% for 8–9 nm gaps, but significantly smaller for 3–4 nm gaps. The gap leakage resistance is around 1012–1013 Ω, implying very good isolation. As an example, we present a transport study on a single 8 nm Co particle junction using a 10 nm gap.

Nanometer Patterning with Ice

“…[1][2][3][4] E-beam lithography typically involves applying, chemically transforming, and chemically dissolving a polymer resist. 5 The desire to decrease device size, to enhance the role of quantum mechanical device characteristics, and to pattern increasingly complex substrates requires new lithographic approaches to define nanometer scale structures.…”

Nanosphere Lithography for Sub‐10‐nm Nanogap Electrodes

“…focused e-beam or a very precise alignment system, [21] are needed to obtain very fine structures, which leads to high cost. Moreover, the smaller feature size requires thinner photoresist, which greatly increases the complexity of lift-off process possibly resulting in low yield.…”

Nanogap Electrodes Developed Using Focused Ion Beam Technology

“…However, it only provides statistical control with a low reproducibility. More recently, high-yield fabrication techniques based on EB lithography have been developed (Liu et al 2002;Saifullah et al 2002). These techniques, however, involve precise alignments of the fabrication conditions, which require great skills.…”