Similitude study for a laminated cylindrical tube under tensile, torsion, bending, internal and external pressure. Part I: governing equations

Similitude requirements and scaling laws for flutter prediction of angle-ply composite plates

“…Chouchaoui and Ochoa [5] demonstrated the validity of the scale model in predicting the behavior of a laminated cylindrical tube. Tensile, torsion, bending, internal and external pressure loads are considered in their study.…”

Mechanical response of steel wire wound reinforced rubber flexible pipe under internal pressure

“…(6) The flexible pipe, with round steel or hexagonal steel joint, the tensile strength of 445 MPa, in accordance with GB/T14292-93 standard.…”

“…Based on Lekhnitskii solution, Wild and Vichers [4] presented a solving process about anisotropic cylinder shell under Xia et al [5] put forward the elastic solution of stress and elastic deformation of filament wound composite pipe under internal pressure by using 3D anisotropic elastic theory. Chouchaoui et al [6][7] and Tarn et al [8] deemed that composite pipe with multilayer structure was laminated of single anisotropic plate, and performed stress analysis on the composite pipe with multilayer structure under complex loads such as internal or external pressure, tension, twist and bend.…”

Numerical analysis of the mechanical behaviour of reinforced thermoplastic pipes under combined external pressure and bending

“…Chouchaoui [13,14] conducted a similitude study for a laminated cylindrical pipe under tension, torsion, bending, internal and external pressure. His study roughly described some characteristics of the mechanical behaviour of the pipe under these loads.…”