Silicone Rubber Composites Reinforced by Carbon Nanofillers and Their Hybrids for Various Applications: A Review

Abstract

Without fillers, rubber types such as silicone rubber exhibit poor mechanical, thermal, and electrical properties. Carbon black (CB) is traditionally used as a filler in the rubber matrix to improve its properties, but a high content (nearly 60 per hundred parts of rubber (phr)) is required. However, this high content of CB often alters the viscoelastic properties of the rubber composite. Thus, nowadays, nanofillers such as graphene (GE) and carbon nanotubes (CNTs) are used, which provide significant improvements to the properties of composites at as low as 2–3 phr. Nanofillers are classified as those fillers consisting of at least one dimension below 100 nanometers (nm). In the present review paper, nanofillers based on carbon nanomaterials such as GE, CNT, and CB are explored in terms of how they improve the properties of rubber composites. These nanofillers can significantly improve the properties of silicone rubber (SR) nanocomposites and have been useful for a wide range of applications, such as strain sensing. Therefore, carbon-nanofiller-reinforced SRs are reviewed here, along with advancements in this research area. The microstructures, defect densities, and crystal structures of different carbon nanofillers for SR nanocomposites are characterized, and their processing and dispersion are described. The dispersion of the rubber composites was reported through atomic force microscopy (AFM), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The effect of these nanofillers on the mechanical (compressive modulus, tensile strength, fracture strain, Young’s modulus, glass transition), thermal (thermal conductivity), and electrical properties (electrical conductivity) of SR nanocomposites is also discussed. Finally, the application of the improved SR nanocomposites as strain sensors according to their filler structure and concentration is discussed. This detailed review clearly shows the dependency of SR nanocomposite properties on the characteristics of the carbon nanofillers.

New Principles of Polymer Composite Preparation. MQ Copolymers as an Active Molecular Filler for Polydimethylsiloxane Rubbers

“…The control of polymers and polymer compositions' properties by regulating the structure of composition macromolecular components has been, and remains, the most important tool of chemists in their movement towards materials with superior properties [1,2]. Elastomeric materials based on polydimethylsiloxane (PDMS) rubbers are now widely used as rubbers, sealants, and coatings for various purposes [3,4]. The majority of the practical applications of PDMS elastomers are not feasible without silica fillers [5][6][7].…”

Constructing a Segregated Magnetic Graphene Network in Rubber Composites for Integrating Electromagnetic Interference Shielding Stability and Multi-Sensing Performance

“…Rubber-based composite materials, especially graphene rubber composite materials, have excellent flexible, thermoelectric, sensing, and morphologically controllable properties. These materials are ideal for smart, flexible, wearable electronic devices that have been studied by many researchers [ 1 , 2 , 3 , 4 , 5 ]. However, a certain amount of electromagnetic interference (EMI) occurs between electronic products, which will affect the performance of this kind of device.…”

The Use of Copper Oxides as Cross-Linking Substances for Chloroprene Rubber and Study of the Vulcanizates Properties. Part II. The Effect of Filler Type on the Properties of CR Products

“…Filler dispersion is an important part of rubber processing technology [ 12 , 37 , 38 ]. The good dispersion of a filler ensures the good mechanical properties of the final products.…”