В работе представлены результаты исследования применения сольватотермического способа нанесения n-CuO на поверхность компонентов пиротехнических составов в качестве модификатора скорости горения. Разработан способ нанесения n-CuO на поверхность неорганических солей. Данный способ позволил расширить номенклатуру веществ (применяемых в пиротехнике) для поверхностной модификации. Проведены эксперименты по нанесению n-CuO на поверхность наиболее распространенных в пиротехнике неорганических окислителей, таких как нитрат и перхлорат калия. Поверхность модифицированных образцов была исследована методом SEM, результаты которого подтверждают образование наноразмерного оксида меди (II). Модифицирование поверхностей неорганических солей приводит к изменению их характеристик тепловой стабильности, исследование которых производились методами TGA/DSC. Произведенная модификация приводит к изменению скорости горения пиротехнических составов. Применяемый в работе способ модификации показал, как катализирующий, так и ингибирующий скорость горения эффект, который зависит от природы модифицируемого вещества.
The paper presents the results of a study of the application of the solvothermal method of applying n-CuO to the surface of the components of pyrotechnic compositions as a combustion rate modifier. A method has been developed for applying n-CuO to the surface of inorganic salts. This method made it possible to expand the range of substances (used in pyrotechnics) for surface modification. Experiments were carried out on the deposition of n-CuO on the surface of the most common inorganic oxidizers in pyrotechnics, such as potassium nitrate and perchlorate. The surface of the modified samples was studied by SEM, the results of which confirm the formation of nanosized copper oxide (II). Modification of the surfaces of inorganic salts leads to a change in their thermal stability characteristics, the study of which was carried out by TGA/DSC methods. The modification made leads to a change in the burning rate of pyrotechnic compositions. The modification method used in the work showed both a catalytic and an inhibiting burning rate effect, which depends on the nature of the modified substance.