The pore structure and mineral characteristics affect the accumulation and migration of hydrocarbons in shale, which determines the production capacity of shale oil. In this study, shale samples from the Chang 7 member of the Ordos Basin in China were selected to investigate the pore space characteristics, the effect of hydrocarbon accumulation on pore heterogeneity, and the hydrocarbon migration changes based on fractal theory, and a series of experiments were conducted involving X-ray diffraction (XRD), total organic carbon (TOC), Soxhlet extraction, and low-temperature nitrogen (N2) and carbon dioxide (CO2) adsorption. Then, the factors affecting extraction efficiency in shale pores were discussed. The interparticle pores contributed most to the accumulation of shale oil, and the organic matter (OM) pores contributed positively to the adsorption of hydrocarbons. The accumulation of hydrocarbons in the pore space did not increase the heterogeneity of the shale pore structure. The contents, states, and positions of hydrocarbons changed during the extraction process. Hydrocarbons were redistributed on the pore surface after Soxhlet extraction, and the heterogeneity of hydrocarbon adsorption and pore surface roughness were improved. Some heavy hydrocarbons and adsorbed components were pyrolyzed, resulting in the gradual escape of the adsorbed layer in the large pores. However, the free oil in the small pores diffused to the large pores and reaggregated on the surface, restoring a stable adsorption layer. The extraction rate was closely related to the pore throat structure and the wettability of mineral surfaces. The configuration between pores and throats had a crucial influence on the extraction rate. A high proportion of meso-pores, which effectively connect micro- and macro-pores, had a higher diffusion efficiency and a higher extraction rate. The OM pores with high energy adsorption were located in the micro-pores, and the shale oil existed in a dissolved state with high mobile capacity. The wettability of mineral surfaces affected the adsorption behavior during extraction, and strong oil wetting promoted hydrocarbon re-adsorption in clay minerals, so that the volume of micro-pores was smaller after extraction.
