Shut-in Stabilization Time Optimization for Better Reservoir Pressure Monitoring Harnessing Neural Network Modeling

Abstract

Stabilization time is an essential key for pressure measurement accuracy. Obtaining representative pressure points in build-up tests for pressure-sensitive reservoirs is driven by optimizing stabilization time. An artificial intelligence technique was used in the study for testing pressure-sensitive reservoirs using measuring gauges. The stabilization time function of reservoir characteristics is generally calculated using the diffusivity equation where rock and fluid properties are honored. The artificial neural network (ANN) technique will be used to predict the stabilization time and optimize it using readily available and known inputs or parameters. The values obtained from the formula known as the diffusion formula and the ANN technique are then compared against the actual values measured from pressure gauges in the reservoirs. The optimization of the number of datasets required to be fed to the network to allow for coverage over the whole range is essential as opposed to the clustering of the datasets. A total of about 3000 pressure derivative samples from the wells were used in the testing, training, and validation of the ANN. The datasets are optimized by dividing them into three fractional parts, and the number optimized through monitoring the ANN performance. The optimization of the stabilization time is essential and leads to the improvement of the ANN learning process. The sensitivity analysis proves that the use of the formula and ANN technique, compared to actual datasets, is better since, in the formula and ANN technique, the time was optimized with an average absolute relative error of 3.67%. The results are near the same, especially when the ANN technique undergoes testing using known and easily available parameters. Time optimization is essential since discreet points or datasets in the ANN technique and formula would not work, allowing ANN to work in situations of optimization. The study was expected to provide additional data and information, considering that stabilization time is essential in obtaining the pressure map representation. ANN is a superior technique and, through its superiority, allows for proper optimization of time as a parameter. Thus it can predict reservoir log data almost accurately. The method used in the study shows the importance of optimizing pressure stabilization time through reduction. The study results can, therefore, be applied in reservoir testing to achieve optimal results.