Shear resistance for lateral force of light-frame wall sheathed with structural particleboard (PB)

Abstract

The shear resistance of a structural particleboard (PB) wall was evaluated as a means to utilize recycled wood and low-grade logs for long periods. The wall was composed of spruce-pine-fir (SPF) lumber, nails, and structural PB, which was developed by improving the water resistance of default PB. Structural PB has a higher density than OSB, which is a commonly used covering material for light wooden structural walls, so a longer end distance for nailing at edge of sheathing is needed for structural PB. In this study, it was confirmed that structural PB walls sufficiently resisted lateral load when the end distance was 15 mm. In this case, the shear strength, shear modulus, and ductility of the structural PB wall for lateral cyclic load were confirmed as 9.2 kN/m, 2.0 kN/mm, and 6.2, respectively. When compared to the design value, the shear strength value was higher than that of the OSB wall and the plywood wall. The shear modulus was lower than that of OSB walls, but higher than plywood walls. Based on the above results, it was considered that structural PB light-frame wall could be used in residential load-bearing applications.