Shear performance of reinforced concrete beams strengthened in shear using NSM bars and reinforced HSC layers

This paper presents the findings of a large‐scale experimental study that focus on assessing structural behavior of reinforced concrete (RC) cantilever slabs with carbon/epoxy fiber‐reinforced polymer (CFRP) composite strips using a near‐surface‐mounted (NSM) approach. The NSM/CFRP system evaluated in this study was implemented in strengthening the shoulders of the Slide Canyon Bridge in California, USA. The experimental phase is divided into two main parts: (i) determining the design parameters for NSM, including the bondline strength through pull‐out tests, and (ii) conducting a practical evaluation of the bending behavior of original and retrofitted RC cantilever slabs, each with varying NSM reinforcement and three different development lengths. Results of this study indicated that the use of NSM‐CFRP has a considerable benefit in that it significantly improves ductility and changes the failure mode of the unstrengthened RC slab from the typical brittle shear‐based failure mode to a more ductile flexural‐based failure mode. The large‐scale slab specimens' performances, which had different development lengths, showed little variance, except for the slab specimen with a development length of 457.0 mm that exhibited an appreciable flexural stiffness as compared to other specimens evaluated in this study. In order to simulate the serviceability and ultimate behavior of the RC slab specimens, linear and nonlinear finite element analyses were performed. A satisfactory agreement between numerical and experimental results was achieved especially at load level prior the initiation of large‐size cracks.

Section: Introductionmentioning

confidence: 99%

Structural evaluation of RC overhang cantilever slab strengthened with FRP near‐surface mounted (NSM) composites for bridge applications

Mosallam,

Ghaban,

Mirnateghi

et al. 2023

A review on retrofitting concrete members with near‐surface mounted‐fiber reinforced polymer composites

Al‐Zu'bi,

Fan,

Bertolesi

et al. 2024

In an era flooded with a multitude of studies investigating the performance of concrete structures retrofitted using fiber‐reinforced polymer (FRP) materials, this review addresses the critical need for a comprehensive overview of the retrofitting of concrete members using near‐surface mounted (NSM)‐FRP composites, aiming to save time and effort while providing engineers and research community with valuable resources relevant to the field. This review focuses on the key factors influencing both the flexural and shear retrofitting processes of reinforced concrete (RC) beams, such as the percentage, type, size and geometry of NSM‐FRP reinforcement, as well as groove design, groove‐filling materials and beam depth. Moreover, the paper explores the failure modes associated with each retrofitting type, for example, debonding failures, shear/flexural failure and rupture of steel or NSM‐FRP reinforcement, to name a few. The review also delves into the bond behavior of NSM‐FRP‐bonded joints, examining factors, such as the bonded length, surface texture of NSM‐FRP reinforcement and type of bonding agent, which would affect the bond behavior and strength of the joints. The failure mechanisms associated with the bonded joints, such as interfacial bond failure, FRP rupture and splitting of the adhesive cover, are also highlighted. Finally, this compilation aims to guide engineers and researchers by offering a critical and comprehensive database for optimal designs, further development and suggesting future research directions.

Numerical analysis of reinforced concrete beams enhanced in shear with external polymer cement mortar‐bonded FRP grid

Monier,

Saifeldeen,

Fouad

2024

This paper presents a finite element (FE) modeling approach to assess the performance of reinforced concrete (RC) beams strengthened in shear using external polymer cement mortar (PCM)‐bonded basalt fiber‐reinforced polymer (BFRP) grids. The study begins with an experimental program and FE modeling of a double shear bond test, simulating the bond behavior between the BFRP grid and RC beams with PCM. Subsequently, a FE model for BFRP shear‐strengthened beams explores key parameters, including shear span to depth ratio, bonding agent type (PCM and epoxy resin), and angles between BFRP grid bars and the beam axis. Comparative analysis with experimental results verifies the accuracy of the FE models. Additionally, a critical parameter, the BFRP reinforcement ratio, is numerically investigated, revealing that achieving a ratio between 1.33% and 1.55% enhances both maximum load and deflection in beams strengthened with externally bonded composite reinforced mortar.