Shattering Effect Study of Aramid–Steel Composite Target Plates under Localized Blast Loading

Abstract

With the extensive application of composite laminates in protective structures, new materials and new structures have been developed rapidly. As an excellent impact-resistant material, aramid fiber is widely used in the field of protective structures. Aramid laminates show excellent performance in anti-penetration, but there is no research on its anti-explosive characteristics. In this paper, a kind of aramid–steel composite target (ASCT) plate protective structure is proposed innovatively. The failure mode and damage mechanism of three kinds of ASCT plates with equal area density and single-layer steel plates under a local explosion load are studied, and the most effective composite mode is given. The results show that the aramid laminates stuck on the back explosion surface ASCT (SA) exhibit the best anti-explosion effect, which is center deflection reduced by 12% and 18% compared with a single-layer steel plate (S-1) and an equal-thickness steel plate (S-2), respectively. Plate ASCT (SA), plate ASCT (AS), and ASCT (SAS) plate center tear failure did not occur. The analysis shows that different combinations change the propagation of stress waves in the structure, which in turn affects the failure of the composite plate. The critical failure dose of different structural configuration plates is obtained by simulation. The influence of explosion center distance, explosive charge, and bonding thickness of aramid laminate on the central deflection of steel plate was discussed by dimensional analysis, and the empirical formula of central deflection of the aramid–steel composite target plate was obtained. The research results can provide a theoretical basis and reference for the lightweight and efficient protection of composite structural armor.