Shape-Factor Impact on a Mass-Based Hybrid Nanofluid Model for Homann Stagnation-Point Flow in Porous Media

Abstract

This paper studies the impact of shape factor on a mass-based hybrid nanofluid model for Homann stagnation-point flow in porous media. The HAM-based Mathematica package BVPh 2.0 is suitable for determining approximate solutions of coupled nonlinear ordinary differential equations with boundary conditions. This analysis involves discussions of the impact of the many physical parameters generated in the proposed model. The results show that skin friction coefficients of Cfx and Cfy increase with the mass of the first and second nanoparticles of the hybrid nanofluids w1 and w2 and with the coefficient of permeability in porous media. For the axisymmetric case of γ = 0, when w1 = w2 = 10 gr, wf = 100 gr and Cfx = Cfy = 2.03443, 2.27994, 2.50681, and 3.10222 for σ = 0, 1, 2, and 5. Compared with w1 = w2 = 10 gr, wf = 100 gr, and σ = 0, it can be found that the wall shear stress values increase by 12.06%, 23.21%, and 52.48%, respectively. As the mass of the first and second nanoparticles of the mass-based hybrid nanofluid model increases, the local Nusselt number Nux increases. Values of Nux obviously decrease and change with an increase in the coefficient of permeability in the range of γ < 0; otherwise, Nux is less affected in the range of γ > 0. According to the calculation results, the platelet-shaped nanoparticles in the mass-based hybrid nanofluid model can achieve maximum heat transfer rates and minimum surface friction.

Heat and mass transfer with entropy optimization in hybrid nanofluid using heat source and velocity slip: a Hamilton–Crosser approach

“…Subray et al 2 comparatively analyzed the flow of a nano and hybrid nanofluid for brick, blade and laminar shaped nanoparticles. Li and You 3 simulated the flow of a water-based hybrid nanofluid over a stretching sheet with various shapes of copper and alumina nanoparticles. Akbar et al 4 studied the Maxwell nanofluid flow over a linearly stretched surface.…”