Sensor-Oriented Path Planning for Multiregion Surveillance with a Single Lightweight UAV SAR

Abstract

In the surveillance of interested regions by unmanned aerial vehicle (UAV), system performance relies greatly on the motion control strategy of the UAV and the operation characteristics of the onboard sensors. This paper investigates the 2D path planning problem for the lightweight UAV synthetic aperture radar (SAR) system in an environment of multiple regions of interest (ROIs), the sizes of which are comparable to the radar swath width. Taking into account the special requirements of the SAR system on the motion of the platform, we model path planning for UAV SAR as a constrained multiobjective optimization problem (MOP). Based on the fact that the UAV route can be designed in the map image, an image-based path planner is proposed in this paper. First, the neighboring ROIs are merged by the morphological operation. Then, the parts of routes for data collection of the ROIs can be located according to the geometric features of the ROIs and the observation geometry of UAV SAR. Lastly, the route segments for ROIs surveillance are connected by a path planning algorithm named the sampling-based sparse A* search (SSAS) algorithm. Simulation experiments in real scenarios demonstrate that the proposed sensor-oriented path planner can improve the reconnaissance performance of lightweight UAV SAR greatly compared with the conventional zigzag path planner.

A Novel Calibration Board and Experiments for 3D LiDAR and Camera Calibration

“…According to the similarity principle of camera imaging, their coordinates in pixel coordinate system can be solved through the relationship between the feature points and their adjacent corner According to the above-mentioned four feature point coordinates, distance values and collinear conditions, the coordinates of the above four points in calibration board coordinate system can be solved, as shown in Equation (6).…”

“…Heterogeneous multi-sensor data fusion has extensive research and applications in mobile robots [1], driverless cars [2], and other fields. Compared with a single-sensor system, multi-sensor fusion systems [3] can provide richer environmental information and complete higher-level tasks such as target detection [4], autonomous location [5], and path planning [6]. The combined application of 3D light detection and ranging (LiDAR) and camera is very common.…”

UAV Mission Planning with SAR Application

“…Unmanned systems equipped with SAR are widely used in civil and military applications for environmental monitoring, mapping, and aerial reconnaissance [20,21]. Compared with traditional SAR air systems, UAV SAR is more flexible in conducting a military reconnaissance mission due to greater safety for UAVs, better reconnaissance parameters, and lower research and development costs.…”

“…Scheduling problem, based on the general VRPTW problem, is presented in many works, including Li et al (2018) [21]. In the model presented, the precedence between some waypoints is introduced.…”

An Improved RF Detection Algorithm Using EMD-based WT

“…Over the previous decade, drones have been increasing, which are used for data acquisition by more and more actors and stakeholders such as scientific institutions, governmental authorities, individuals and commercial operators [5]. Especially in civil applications, drones are widely applied in land administration [6], documentation of cultural heritage and archaeological sites [7], support for disaster management [8], high-resolution surface reconstruction in the geosciences [9], forest and agriculture change detection [10], surveying and mapping [11], and wildlife observation [12].…”