2006
DOI: 10.1016/j.tsf.2005.07.218
|View full text |Cite
|
Sign up to set email alerts
|

Self-assembled single wall carbon nanotube field effect transistors and AFM tips prepared by hot filament assisted CVD

Help me understand this report

Search citation statements

Order By: Relevance

Paper Sections

Select...
1
1
1
1

Citation Types

0
18
0

Year Published

2007
2007
2017
2017

Publication Types

Select...
9

Relationship

0
9

Authors

Journals

citations
Cited by 22 publications
(18 citation statements)
references
References 16 publications
0
18
0
Order By: Relevance
“…In this case, the pulse duration is only 500 ns at 1 kHz, resulting in a difference between the on and off currents of only 5%. Compared to the pulse durations in the range of 1 to 10 ms reported for CNT‐FET memories with a SiO 2 gate dielectric29, 32, 33 the present devices can be switched approximately three orders of magnitude faster. The highest operating clock frequency was found to be ∼ 5 kHz (at a duty cycle of 10%), which is not limited by the device itself but rather by the bandwidth of the current sense amplifier used to measure the drain current.…”
mentioning
confidence: 65%
“…In this case, the pulse duration is only 500 ns at 1 kHz, resulting in a difference between the on and off currents of only 5%. Compared to the pulse durations in the range of 1 to 10 ms reported for CNT‐FET memories with a SiO 2 gate dielectric29, 32, 33 the present devices can be switched approximately three orders of magnitude faster. The highest operating clock frequency was found to be ∼ 5 kHz (at a duty cycle of 10%), which is not limited by the device itself but rather by the bandwidth of the current sense amplifier used to measure the drain current.…”
mentioning
confidence: 65%
“…Diameter of SWCNT is very small (1-4 nm) and more important it is constant through time, which is not the case of silicon-based tips; besides SWCNT offers little contamination during imaging. The current challenge with SWCNT is the production of correctly oriented SWCNT on AFM cantilever (Marty et al, 2006). Another road for improvement is the capacity to correct image distortion due to the finite tip size.…”
Section: Discussionmentioning
confidence: 99%
“…The nanotubes are grown directly 18 at the tip apex of AFM probes by Chemical Vapor Deposition (CVD): the bare silicon cantilevers are fully dipped into the catalyst solution, then gently dried in a nitrogen flux before being placed in the furnace. CNTs grow everywhere on the cantilever, and around 1 in 3 cantilevers has a CNT at the tip 14 .…”
Section: Quasi-static Force Measurementsmentioning
confidence: 99%