Self-Assembled Sandwich-like MXene-Derived Composites as Highly Efficient and Sustainable Catalysts for Wastewater Treatment

Abstract

Photocatalysts play an increasingly important role in environmental remediation polluted by industrial wastewater. However, the preparation of adsorbents and catalysts with high activity by simple and easy methods is still a great challenge. Here, sandwich-like composite catalyst Cu2O/TiO2/Ti3C2 was prepared by an easily available solvent reduction measure for the highly efficient catalytic nitro compounds. In particular, sandwich-like composite catalyst Cu2O/TiO2/Ti3C2 exhibits excellent catalysis for 2-nitroaniline (2-NA) and 4-nitrophenol (4-NP), and its pseudo-first-order reaction rate constants (k) are 0.163 and 0.114 min–1, respectively. Interestingly, even after eight consecutive cycles of catalytic experiments, the conversion rates of catalytic 2-NA and 4-NP are still greater than 95 and 92%, respectively, demonstrating that the obtained catalyst has excellent catalytic capability and a high reutilization rate. The excellent catalytic performances of Cu2O/TiO2/Ti3C2 can be attributed to the fact that Ti3C2 provides a greater reaction site for the formation of Cu2O and reduces the aggregation during the formation of Cu2O by in situ synthesis. Therefore, ternary composite catalyst Cu2O/TiO2/Ti3C2 prepared by solvent reduction not only supplies a technical method for the catalytic reaction of MXene-based material but also lays the foundation for the development of new photocatalysts.

Synthesis of a New Amino-Furopyridine-Based Compound as a Novel Fluorescent pH Sensor in Aqueous Solution

“…As in AFP 2e , the possible major resonance form in basic solution, the HOMO-LUMO gap is also reduced compared to AFP 2 , making it more close to the excitation energy. It might be responsible for the enhancement of fluorescence in basic solutions, demonstrating wide applications. − …”

Construction of Multifunctional and Adjustable Langmuir–Blodgett Composite Films Containing Black Phosphorus with High Stability for Optically Electrical Applications

“…The result of EIS curves shows that the BPNS-PEI/MB-90 composite film has the smallest semicircular arc, indicating that it had the best conductivity and carrier transfer rate, as shown in Figure c. All the results prove that the obtained BPNS-PEI and dye composite films had high-efficiency charge-transfer ability and showed enhanced photoelectric conversion ability compared with pure MB film and BPNS-PEI film electrodes, showing wide applications in composite materials. − …”

Construction of Nanocrystalline Cellulose-Based Composite Fiber Films with Excellent Porosity Performances via an Electrospinning Strategy

“…The trend change is consistent with the results seen by SEM. This is mainly because the diameter and thickness of the fiber membrane obtained by electrospinning constantly change with the addition of KH550-CNC. − The overall increase in the diameter of the composite fiber and the more complicated cross-covering between the fibers will lead to an increase in porosity. − However, excessive diameter and thickness will increase the density of the fiber membrane. The porosity calculated by the image method begins to decrease (Table ).…”