“…A superhydrophobic surface, with a water contact angle (WCA) larger than 150° and a droplet sliding angle (SA) less than 10°, has attracted increasing attention and shown extensive applications in diverse fields, including oil/water separation, − anti-icing, − self-cleaning, − and biological antifouling. − Studies prove that the modification of micro/nanostructures with low-surface-energy materials is the key to constructing superhydrophobic surfaces, − which can maintain the water droplet in the Cassie–Baxter (CB) state and therefore exhibit excellent superhydrophobicity . Based on this, many kinds of monomers with long carbon chains (such as stearic acid, , fluorinated compounds, , and silanes) are widely used to prepare superhydrophobic coatings due to their lower surface energy, good photo/heat resistance, and chemical stability. − For example, Polyakov and co-workers first prepared dendrite-like zinc structures on a steel surface by electrodeposition and then treated them with stearic acid, and the obtained coating had excellent superhydrophobicity (WCA > 152°) and anticorrosion properties . Wang et al prepared a superhydrophobic coating by spraying fluoroalkyl silane onto fabrics, which exhibited outstanding superhydrophobicity (WCA = 171°) and good durability against UV light, acid, repeated machine washing, and abrasion .…”