Selection of key additive materials for white oil – based drilling fluids

Abstract

The selection of key additive materials for a new type of oil-based drilling fluid was studied in this paper. The oil-based drilling fluid can strengthen well walls and ensure safety. It is suitable for high-temperature and high-pressure wells, deep wells and ultra-deep wells. A new type of high-temperature white oil-based drilling fluid was prepared by using 5# white oil as continuous phase, HIS as thickening agent, SDBS as emulsifier, and asphalt powder oxidized at 180°C as filtration agent. The results showed that the saturation concentration of sodium dodecyl benzene sulfonate (SDBS) was 4%, the saturation concentration of asphalt powder oxidized at 180°C was 4%, the saturation concentration of Tween-80 was 10%. The final resistance of high temperature and high pressure oil based drilling fluid formulation material is: No. 5 white oil + 4% SDBS + 5% modified bentonite + 4% asphalt powder oxidized at 180°C + 10% Tween-80 + 1.5% Barite + CaO. The performance evaluation of the new oil-based drilling fluid shows that shale expansion is 0.21mm, anti-temperature up to 220°C, and anti-pollution ability is good. The rheological properties, resistance of high-temperature highpressure have been greatly improved. Therefore, the new white oil-based drilling fluid can resistance of hightemperature and also has low toxicity, which can meet the exploration and development of more complex wells.