SECM Investigation of Carbon Composite Thermoplastic Electrodes

Abstract

HAL is a multi-disciplinary open access archive for the deposit and dissemination of scientific research documents, whether they are published or not. The documents may come from teaching and research institutions in France or abroad, or from public or private research centers. L'archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des établissements d'enseignement et de recherche français ou étrangers, des laboratoires publics ou privés.

A Review of Cyclic Olefin Copolymer Applications in Microfluidics and Microdevices

“…COC films have been reported as a binding material for thermoplastic electrodes or for creating hollow structures through thermal annealing. [209][210][211][212][213] Canales et al [209] used COC sheets to make a multimodality fiber all-polymer probe. The sheets were rolled around a rod and annealed to form a cylinder that was filled with conductive material and used as a probe.…”

“…On-chip Raman detection Nanoimprinting [26] Laser chips Nanoimprinting [ 25,207] Fiber probes Rolling and thermal annealing [ 209,210] Sensing Thermoplastic binders [211][212][213][214] Lab on chip Plasma-enhanced lift-off and metal bonding thermal bonding [ 160,185,[218][219][220]224] Memristors Plasma-enhanced lift-off [221][222][223] Tunable RF filter Plasma-enhanced lift-off [ 217] Porous gold Film Deposition/etching [ 220] Tuning the wettability of COC Plasma-enhanced lift-off [ 161] DNA analysis Print, cut, and laminate (PCL) [ 225] gations focused on the applications of COCs in thermal systems, such as in renewable energy or thermal insulation. Cui et al [226] investigated the performance of solar concentrators made of COC (TOPAS 5013) and compared it with optical silicone MS-1002 and reported that COC and silicone are good choices in replacing the conventional glass material in solar collectors.…”

“…COC films have been reported as a binding material for thermoplastic electrodes or for creating hollow structures through thermal annealing. [ 209–213 ] Canales et al. [ 209 ] used COC sheets to make a multimodality fiber all‐polymer probe.…”

A robust gradient solid electrolyte interphase enables fast Zn dissolution and deposition dynamics

“…4(a)). Such negative behavior of the Zn surface delivers an insulating feature, 43 suggesting that the outermost layer of the formed SEI is electrochemically inactive. Compared to the baseline electrolyte, the negative feedback of the Zn surface using ternary electrolyte displays a larger value when the SECM probe approaches the electrode, implying a relatively fast electron exchange.…”

Characterization of Factors Affecting Stripping Voltammetry on Thermoplastic Electrodes

“…They are easily fabricated carbon composite electrodes that maintain exceptional conductivity and electron transfer kinetics. [13][14][15][16][17][18][19][20] Three primary thermoplastic binders have been explored for TPEs, including polymethyl methacrylate (PMMA), 13,21 polycaprolactone (PCL), 14,16 and polystyrene (PS). 17,18 All binders create functional electrodes, but their individual properties greatly influence their application due to their unique surface and electrochemical properties.…”