Rubberwood—Potential for Pulp and Composite Board Utilization

Abstract

Rubberwood (Hevea brasiliensis Muell. Arg) is underutilized in most developing countries but has potential to be a solution to the shortage of wood for pulp, paper and wood composite products at the end of its production cycle. Determining and understanding its fibre properties (fibre dimensions and morphology) is key in its utilization for pulp and paper as well as composites. This study assessed the effect of age on the fibre properties of rubberwood. Samples of wood at four ages (10, 15, 20 and 25 years) were obtained at both the axial (base and top of merchantable length) and radial direction (innerwood, middlewood and outerwood). Slivers were obtained from the samples and macerated to provide individual fibres for optical measurement. Fibre dimensions at the four ages were measured, and their morphology was determined. Fibre properties and morphology were significantly affected by age at p = 0.05. Average fibre length was 1.47 ± 0.12 mm, with non-constant variation observed across the different ages, and from pith to bark. Average lumen width was 16.87 µm, and fibre diameter ranged from 25.02 µm to 27.23 µm. The fibre properties of rubberwood potentially make it suitable for pulp and paper production as well as wood composite boards.