Roughness Parameters Calculation By Means Of On-Line Vibration Monitoring Emerging From AWJ Interaction With Material

Abstract

The paper deals with a study of relations between the measured Ra, Rq, Rz surface roughness parameters, the traverse speed of cutting head v and the vibration parameters, PtP, RMS, vRa , generated during abrasive water jet cutting of the AISI 309 stainless steel. Equations for prediction of the surface roughness parameters were derived according to the vibration parameter and the traverse speed of cutting head. Accuracy of the equations is described according to the Euclidean distances. The results are suitable for an on-line control model simulating abrasive water jet cutting and machining using an accompanying physical phenomenon for the process control which eliminates intervention of the operator.

Recognition of Acoustic Signals of Induction Motors with the Use of MSAF10 and Bayes Classfier

“…Scientists developed methods of condition monitoring of electrical motors and various devices [1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20]. Many data processing methods (such as FFT, Wavelets, classifiers) were developed in the literature [21][22][23][24][25][26].…”

Theoretical and Experimental Research of Error of Method of Thermocouple with Controlled Profile of Temperature Field

“…Therefore, it is reasonable to hold several separate experiments to determine the convergence of the measurement results. [34], [35] which are resistant to high temperatures, the thermowell of MTC and other constructive elements of the studied prototype are made of regular constructional steel.…”

New Method of Machining Teeth on Unspecialised Machine Tools

“…The methods of measurements of straight cylindrical gears and bevel gears, as well as the ways of assessment of machining accuracy on CNC machines are described by [14]. The increasing need to improve the service properties of machine parts, including gear teeth, necessitates constant development of machining technologies aiming at reduction of surface roughness and at controlling the properties of the top layer depending on the application [15][16][17][18][19].…”