Robust Reliable Control for Uncertain Vehicle Suspension Systems With Input Delays

Abstract

Synthesis of control design is an essential part for vehicle suspension systems. This paper addresses the issue of robust reliable H1 control for active vehicle suspension system with input delays and linear fractional uncertainties. By constructing an appropriate Lyapunov–Krasovskii functional, a set of sufficient conditions in terms of linear matrix inequalities (LMIs) are derived for ensuring the robust asymptotic stability of the active vehicle suspension system with a H1 disturbance attenuation level c. In particular, the uncertainty appears in the sprung mass, unsprung mass, damping and stiffness parame-ters are assumed in linear fractional transformation (LFT) formulations. More precisely, the designed controller is presented in terms of the solution of LMIs which can be easily checked by MATLAB-LMI toolbox. Finally, a quarter-car suspension model is considered as an example to illustrate the effectiveness and applicability of the proposed control strategy. [DOI: 10.1115/1.4028776

RETRACTED: Suppression of panel flutter of near-space aircraft based on non-probabilistic reliability theory

“…According to equation (12), we can obtain the method for solving robust controller and robust reliability, which is satisfied H N performance g for system. The method is as follows…”

Robust distributedH∞filtering over an uncertain sensor network with multiple fading measurements and varying sensor delays

“…Assume that the system is controlled by the following control law: where K =[2.81 −363.43 −162.48 −9.17] is the state feedback gain matrix and the actuator time‐delay satisfies 0.1 ≤ τ ( t ) ≤ 0.2. The detailed description of designing the state feedback control law for a quarter‐car suspension system with actuator time‐delay can be found in other works . By using the zero‐order hold method with the sampling period T s , the discrete‐time state‐space model of the closed‐loop system can be described in the form of with the following parameters: …”

Adaptive backstepping‐based control design for uncertain nonlinear active suspension system with input delay

“…For the inequality of . V 2 (e 1 , e 2 ,̃, t) ≤ 0, integrating both of the sides in (19) from the range of 0 to t simultaneously, we can get…”

“…In nonlinear active suspension system, time delays are often encountered in the controlled channel, particularly in the digital controller as it carries out some calculations associated with the complex control law . The existence of time delay may result in unexpected degradation in control performance and even instability .…”

“…17,18 In nonlinear active suspension system, time delays are often encountered in the controlled channel, particularly in the digital controller as it carries out some calculations associated with the complex control law. 19 The existence of time delay may result in unexpected degradation in control performance and even instability. 20 Additionally, when modeling the real active suspension system, the model uncertainty generated from different vehicle body loads 21 is ubiquitous, and this may impose some difficulties in the implementation of the designed control scheme.…”