Rill and ephemeral gully erosion in a small olive grove catchment in Spain: Interactions between management and conservation measures

Abstract

Concentrated flow erosion in Mediterranean cultivated areas is considered a major process of land degradation. Rills and ephemeral gullies in a 6.4 ha olive orchard catchment located in an intensive commercial farm, which could represent a common degradation scenario in hilly areas, were measured and compared with the sediment loads at the outlet. Four GPS survey campaigns were carried out between March 2009 and March 2014, for periods with cumulative precipitation ranging between 728 and 121 mm. Chopped pruning residues were kept on the lanes during campaigns 2–4, whereas a grass cover crop was seeded in campaign 4. Rainfall, runoff and sediment loads were measured in a flume gauge station at the catchment outlet. The ratio of concentrated flow erosion to catchment sediment load varied between 1.0 and 35.0. Total concentrated flow erosion ranged between 25.0 and 0.1 t ha−1. Rill erosion was the dominant process on ephemeral gullies for three campaigns, with a mean contribution to the total concentrated flow erosion of 55%. Rills clearly followed tractor tracks along the most parallel lanes to the maximum slope. Therefore, a change in traffic direction would be helpful to reduce the connectivity, controlled by the spatial distribution of rows and lanes in the farm. Olive plantation distributions should prioritize hydrological criteria to adapt traffic patterns in olive farms, as long as the tractor manoeuvrability and risk of overturning are not adversely affected. Although the farmer only kept the cover crop for one campaign, it proved to be an efficient measure for interrupting rills along the lanes, whereas pruning residues were effective for the control of interrill erosion. On‐site application of pruning residues reduced their handling and transport costs, while increasing the soil fertility and soil cover. However, guidelines for the efficient application of pruning residues are still necessary in terms of residue rates and orientation.