Rigid Riser System: Alternative System for Coiled Tubing Rig Up on Spar

Abstract

A rigid riser system has been designed, built, and proven as an effective method to conduct coiled tubing operations on floating platforms. This system is installed above the Christmas tree which is supported by the platform's production riser and riser tensioner system. The rigid riser set up is a passive system that does not require the use of a crane or other mechanisms to support or hold up the coiled tubing injector head during operations. The axial load resulting from the weight of the injector head, coiled tubing, and snubbing/pulling forces on the pipe are carried in compression through the rigid riser to the tree and wellhead. The excess capacity of the top tensioner riser (TTR) supports these loads while allowing for relative motion due to tide, waves, and platform motion. The rigid riser system uses a purpose-built, heavy-wall riser and a spider beam insert to resist buckling effects and bending moments. In practice, this system has improved the rig-up time and mitigated HSE issues as compared to the conventional motion-compensated lift frame method. In addition, the system has a support frame that increases the rigidity of the injector head and accessories, resisting the excessive bending and torsional loads imparted by back tension and movements of the coiled tubing (CT) reel. An engineering study was performed to determine the dynamic loads and stresses for the various operational and contingency conditions on all the components of the rigid riser system and to confirm sufficient capacity of the TTR system. The rigid riser system has proven to be a safe and cost-effective solution for coiled tubing operations from a floating platform compared to current motion-compensated jacking frame systems. Coiled tubing well interventions were executed using the rigid riser system, and the operational results have been convincing. The passive nature of the system provides an HSE advantage by eliminating mechanical or human intervention during operation. This paper reviews the design aspects of the rigid riser system, its advantages over the current coil tubing intervention systems, and the operational results after executing the coiled tubing interventions.