Rheological and Chemical Evolution of HMA and WMA Binders Based on Ageing Kinetics

Abstract

It is fundamental to predict or estimate the rheological behavioural evolutions of binders and mixture to ensure a durability service life of the whole infrastructure. This study compared the long-term ageing kinetics of hot mix asphalt (HMA) and warm mix asphalt (WMA) produced with the same base bitumen. The difference in the component was that the WMA contained 1% of Cecabase warm agent and 5.5% of water by the weight of bitumen, to obtain a large expansion ratio (47 times). Rolling thin-film oven test (RTFOT) and pressure ageing vessel (PAV) laboratory ageing were carried out on the binder with or without the warm agent. The oven ageing procedure was conducted on the loose HMA and WMA mixtures for 0, 3, 6, and 9 days. Research results indicated that the dual effect of the studied warm agent and the foaming water sharply decreased the viscosity of the binder at a high temperature. Compared with the HMA, the warm agent improved the ageing resistance of the asphalt binder. However, higher content, such as 5.5 wt.%, of foaming water deteriorated viscosity due to a thinner bitumen film, which was more susceptible to oxidation. Therefore, less than 2 wt.% of warm agent and foaming water was recommended in the foamed WMA preparation.