Review on Investigations Carried out on Burr Formation in Drilling During 1975 To 2020

Abstract

Burr formation during machining process is a vital role in the assembly lines, even though it is a non value added process but also care should be taken while machining due to non avoiding output generated at the end of material removal process. At present almost all manufacturing sectors faces lot of problems due to these issues and invest more money towards deburring still advanced manufacturing methods available. So, complete burr removal is not possible and only thing is reducing utmost by applying better optimizing techniques, to develop good mechanization methods, selecting optimum process parameters and their conditions. The aim this paper deals about research methods implemented by earlier authors on burr formation especially in drilling. The reason why the present authors selected the drilling is number of automotive and aircraft engineers struggling during structural building works because of these burrs wherever precise measurement needed. In this connection, the authors concentrate their study on previous researcher works related to investigations on experimentation, developing new theoretical mechanisms to minimize burrs, adapt a new technologies available to modify drill bit geometries such that improvement in the minimization of burrs. Finally found that research contributions by changing their drill bit geometry and cutting process parameters have been focused on utilizing the methodologies, changing time to time. In analyzing the performance characteristics with that of input process parameters, several mathematical and empirical models were developed by many researchers so far in their works. Efforts have been made in the direction of optimization of process parameters in drilling for minimizing burr size.

Optimum combination of machining parameters during drilling of Aluminium 7075 alloys using Grey based Taguchi approach

“…Data preprocessing is also necessary when the sequence scatter range is too large, or when the directions of the target in the sequences are different. Data pre-processing is a means of transferring the original sequence to a comparable sequence [12][13][14][15][16]. If the target value of original sequence is infinite, then it has a characteristic of the "higher is better".…”